Fixing the "Preparing Automatic Repair" Loop in Windows 10

The straight update or reset of the computer is the recommended Windows response for Preparing Automatic Repair. Here's how the fix goes: Press the power button three times while the Preparing Automatic Repair window is open to force the computer to shut down. Once the system has restarted, it will request maintenance.

The Windows Automatic Repair loop problem has baffled a lot of Windows 10 customers. Because to corrupted system files, Windows is unable to start up properly. The result is that the machine reboots and freezes repeatedly.

The root source of the issue, a patch for it, and what to do if you can't boot into Windows at all are all covered in this article. Let's get going.

What leads to Windows 10's "Preparing automated repair" loop?

Your computer typically displays the "preparing automated repair windows 10 stuck" prompt if an issue results in an unplanned shutdown. For instance, Windows 10 will try to automatically repair the damaged files at the next boot if an issue caused your system to crash.

This repair isn't always able to be done. Your computer gets stuck on the screen with no progress or system repairs when it can't enter automatic repair mode. The computer can be turned off and restarted, but it never advances past the "Preparing automatic repair" screen.

Despite its seriousness, this is a typical Windows mistake that can be seen on Windows 10, Windows 11, Windows 8.1, Windows 8, and even Windows 7. These issues, mistakes, and circumstances are a few of the potential reasons of this error:

• Registries on Windows have problems (wrong keys, missing keys, etc.)
• damage to the Windows Boot Manager's files (BOOTMGR)
• missing or corrupt system files, which are frequently caused by malware infestations
• Hardware driver problems, such as missing or out-of-date drivers
• Other unidentified system causes

No matter what the issue is, you may solve it by using the step-by-step instructions below. Let's examine each of them individually.

Solved: The "Preparing automated repair" loop in Windows 10

To resolve the Windows 10 Automatic Repair loop, try the following:

Method 1: Hard reboot the computer.

Try forcing your computer to shut down and try a power cycle before you start troubleshooting with more sophisticated techniques. This is how:

• By hitting the Power button, you can completely turn off your computer. When the computer is turned off, the screen becomes completely dark, and the computer fans stop moving.
• Disconnect any external devices, including hard drives, headphones, USB flash drives, and so forth. Additionally, take out your computer's power cable or adapter.
• If your laptop has a detachable battery, take the battery out of the battery compartment.
• Press and hold the Power button for about 30 seconds to remove any remaining charge from the capacitors.
• Reconnect the power line to your computer and put the battery back in your laptop if you had previously taken it out. However, hold off on plugging any of the USB gadgets back in just yet.
• Press the Power button repeatedly until the boot screen appears to start your computer. Now you may check to see if Windows 10's "Preparing automatic repair" screen issue has been fixed.
• Try the following fixes if the aforementioned tactic doesn't work.

Method 2. Boot your computer in Safe Mode

Going into Safe Mode may be helpful if you've been having problems with loops with Automatic Repair in Windows 10 and your machine crashes when it tries to start up.

• Start by verifying whether or not this issue occurs in Safe Mode (as opposed to normal boot mode). With Safe Mode activated, you can troubleshoot more effectively if you don't get stuck in a loop.
• When your computer boots up, hold down the F8 key on your keyboard to access the Windows Recovery Environment (WinRE). You might also need to keep holding down the Fn (function) key on some devices.
• Click through to View more sophisticated repair options Restart by selecting Troubleshoot > Advanced settings > Start-up Settings.
• You will now be presented with a number of restart options. You can start your computer in Safe Mode with Networking by hitting F5 on your keyboard. Watch for your computer to restart, then check to see if it boots properly.
• You can continue troubleshooting if Windows 10 starts in Safe Mode without displaying the "Preparing automated repair" prompt. For instance, using Windows Defender to scan your computer for malware is an excellent first step.

Method 3: Use the Command Prompt to rebuild BCD

Your boot files being missing or damaged is one of the frequent causes of the "Preparing automated repair" loop. Some users will afterwards rebuild crucial components of the system by following the steps below.

Note: In the procedures that follow, we'll presume that you can't even start your computer in Safe Mode. You can find the Command Prompt under the taskbar, though, if you have access to your desktop.

• When your computer boots up, hold down the F8 key on your keyboard to access the Windows Recovery Environment (WinRE). You might also need to keep holding down the Fn (function) key on some devices.
• Click Repair your computer and then click on Troubleshoot from the alternatives.
• On the screen will be a variety of advanced settings. Just choose Command Prompt from this menu, then wait for it to load. A black pop-up window ought should appear on the screen.
• Using the Enter key on your keyboard, enter each of the following commands one at a time:

bootrec /fixmbr

bootrec /fixboot

bootrec /scanos

bootrec /rebuildbcd

• When the repair is finished, the notification "Successfully scanned Windows installations" will appear. To close the Command Prompt, enter the word exit and click Enter.
• Check to see if you can get beyond the repair screen when your machine boots up by restarting it.

Method 4. Disable Automatic Repair at boot

When your computer boots up, hold down the F8 key on your keyboard to access the Windows Recovery Environment (WinRE). You might also need to keep holding down the Fn (function) key on some devices.

• After choosing Repair Your Computer from the options, select Troubleshoot.
• On the screen will be a variety of advanced settings. Just choose Command Prompt from this menu, then wait for it to load. A black pop-up window ought should appear on the screen.
• To run the following command, enter the text after typing it:

bcdedit /set recoveryenabled no to the default setting

• As an alternative, try the following command and hit Enter to carry it out if the previous one didn't work:

bcdedit /set recoveryenabled no for "current"

• After making this adjustment, restart your computer to determine if the boot loop still exists.

Method 5: Execute the commands fix boot and chkdsk.

Use the fixboot command to force your machine to boot and perhaps resolve startup problems. You can use this to try to bypass the automatic repair so that your system will start up.

Continue with the procedures and try running Check Disk to repair your computer if the fixboot command didn't work. The chkdsk command tries to locate and fix disc problems, which could assist you in fixing the current boot loop issues.

• When your computer boots up, hold down the F8 key on your keyboard to access the Windows Recovery Environment (WinRE). You might also need to keep holding down the Fn (function) key on some devices.
• Go to Troubleshoot > Advanced options > Command Prompt from the Choose an option screen.
• To run the following command, enter the text after typing it: chkdsk C: /r
• Attend to the scan's conclusion. Try the following command if there was an issue or the scan could not be executed: fix boot C:

Method 6: Fix damaged system files

Your operating system may have severe issues as a result of corrupted systems files, such as boot loops. Windows 10 comes with a built-in tool for troubleshooting called System File Checker (SFC). It can find and fix corrupt files.

• When your computer boots up, hold down the F8 key on your keyboard to access the Windows Recovery Environment (WinRE). You might also need to keep holding down the Fn (function) key on some devices.
• Go to Troubleshoot > Advanced options > Command Prompt from the Choose an option screen.
• Enter the command sfc /scannow after entering it into the box.
• As the System File Checker scans your machine, wait. The software will restore system files and correct any mistakes associated with them in the event of a discrepancy.
• Restart your computer after the scan is finished to check if you can escape the repair loop. If so, using the System File Checker, you were able to resolve the problem.

Method 7. Restore the Windows Registry

Windows Registry corruption can be brought on mostly by malware infections or disc problems. Deathly system faults like a boot loop or blue screen problem are frequently the result of this. Fortunately, you can easily rebuild the Registry and fix any missing, incorrectly set, or damaged keys from the restoration environment.

The Windows Registry is effectively reset to its default settings when you restore it. This implies that any changes made to it, whether made by you or another person, will be lost.

When your computer boots up, hold down the F8 key on your keyboard to access the Windows Recovery Environment (WinRE). You might also need to keep holding down the Fn (function) key on some devices.

• Go to Troubleshoot > Advanced options > Command Prompt from the Choose an option screen.
• To run the following command, enter the text after typing it: *C:WindowsSystem32configregback C:WindowsSystem32config
• You'll be given the option to select which entries to overwrite with the defaults and restore. To continue, enter "All" and press the Enter key.
• Restart your computer after the procedure is complete to see if the boot loop brought on by the Automatic Repair is still present.

Method 8. Reset or Refresh Windows 10

 The last option for a computer stuck in an automated repair boot cycle is to reset Windows 10. You don't need to be concerned about losing your data or files because you have two options: performing a clean reset, which eliminates everything, or keeping your individual files and programmes.

Unless you don't mind losing your files in the first place, our experts advise trying to save as much as you can before choosing the full reset.

• When your computer boots up, hold down the F8 key on your keyboard to access the Windows Recovery Environment (WinRE). You might also need to keep holding down the Fn (function) key on some devices.
• Go to Troubleshoot > Reset this PC from the Choose an option screen.
• To reset or refresh Windows 10, choose one of the available options and then adhere to the on-screen directions. You ought to be able to boot into your system after the procedure is finished without experiencing the loop.

Last thoughts

Loops in Windows Automatic Repair can be a troublesome issue. The causes, solutions, and what to do if your machine won't boot into Windows at all have all been covered in this article.

Do not hesitate to get in touch if you have any queries or need assistance (https://pcvirtualexperts.com/) with these suggestions. We're pleased to respond to any questions you have about technology. Every day of the week, you can reach us by phone, live chat, or email.