A dual-band wifi range extender, the Wavlink Aerial HD4 Outdoor Extender Setup enables all dead zones at your location to be swiftly eliminated. 600 megabits per second are delivered by.
Small offices, homes, and businesses that require outdoor networking should use the Wavlink Aerial HD4, which is designed for WISP CPE and long-distance wireless networks. a strong, user-friendly, professional-grade outdoor Wi-Fi range extender with a sleek design.
A one-year warranty is offered on the Wavlink Aerial HD4 Outdoor Setup.
If you're still having trouble or need advice for your Wavlink Extender Setup, please contact us.
How is the Wavlink HD4 Outdoor Extender installed?
There are three different ways to set up our Wavlink Aerial HD4 Outdoor Setup.
1.Router
2.Repeater
3.The Lan Bridge
How do you set up your Wavlink Aerial Outdoor Extender in Router mode?
The easiest way to set up your Wavlink Aerial Outdoor Extender system is in repeater mode.
Please carefully read the instructions below before installing your Wavlink Outdoor Extender.
- A power outlet must be connected to your Wavlink AC1200 connection (POE) box.
- From the POE box, connect the ethernet cable to the Aerial HD4 extender.
- Using the same connector box, attach the second Ethernet connection to your primary router.
- Use any wirelessly capable device to connect to the WAVLINK-N network.
- Go to wifi.wavlink.com in your browser once you've established a connection.
- You've reached the setup page for the AC1200 outdoor extender.
- To log in, use the "admin" default password.
- Make "Router" your choice, then give your booster a catchy name.
- Change the security to WPA2-PSK instead of none. ( recommended ). After that, enter the password for your extender and select "Next."
You've completed the Wavlink Aerial HD4 Outdoor Extender setup.
How do I set up the Repeater mode on the Wavlink Aerial HD4 Outdoor Extender?
Follow the instructions to install your Wavlink Aerial HD4 Outdoor Extender Setup.
- Start by plugging the Wavlink AC1200 connection (POE) box into an electrical outlet.
- Connect the POE's ethernet connection to the extender once the AC1200 signal turns green.
- Take out any gadget that supports wireless, like a laptop or a phone.
- Check the WAVLINK-N network's wireless settings.
- Open any web browser, such as Safari, Firefox, Chrome, or Internet Explorer.
- Enter your Extender's Web address, ap.setup, or the default IP address, 192.168.10.1, into the search bar.
- your password here.
- You have arrived at the Wavlink Aerial HD4 Outside Extension configuration page.
- Use the "admin" default password to sign in.
As a repeater, the Wavlink Aerial HD4 Outdoor Extender Setup is now complete.
Keep in mind that you cannot connect any cables from the POE to the main router/modem if you want to use your extension as a repeater.
If you need assistance with Wavlink Aerial HD4 Outdoor Extender Setup, don't hesitate to contact our technicians.
Firmware update
Hardware and software both make up firmware. A group of software programs called firmware are incorporated into hardware. You must update the firmware on your Wavlink AC1200 to help resolve any problems (such as not providing enough speed or another issue) that you may experience while using your extender. Along with new features that will assist you in solving your problems, it has more security features.
How do I upgrade the Wavlink Aerial HD4 Outdoor Extender's firmware?
Follow these steps to update the firmware on your Wavlink AC1200:
- On the Wavlink Aerial HD4, turn it on.
- Obtain a mobile device.
- Into the search box, type ap.setup.
- selecting settings, then upgrading the firmware.
- To complete the firmware update procedure, adhere to the instructions.
- Although it will only take a minute, wait to unplug the booster until it is finished.
Wavlink Aerial HD4 Outdoor Extender reset: how to do it?
If you want to retrieve your admin username or password, click here. A factory reset of the booster is required. To get your extender ready for a new setup procedure, it will delete all of your personal information, including passwords, usernames, and SSIDs. Use a hard pointed object, like a paperclip or a needle, to finish the factory reset process.
To reset your Wavlink Aerial HD4 Outdoor Extender, do the following:
- Put a Wavlink AC1200 into an electrical outlet.
- Search for the factory reset button underneath a tiny hole.
- It was on the side panel of the repeater.
- Hold the paper clip in place for 8 to 10 seconds over the reset button.
- It will restart automatically after a brief delay.
If you need assistance with Wavlink Aerial HD4 Outdoor Extender Setup, don't hesitate to contact our technicians.
No comments yet