In this technological era, Linksys provides the dominant networking device that provides outstanding services to people. We all know that staying connected to the internet is becoming very important as it helps us to get work done on time from home by sitting on the sofa. If you want to increase the speed of the internet to enjoy internet surfing then get the Linksys router in your home.
However, in this post, we will tell you about the different methods of Linksys router setup because this information is going to be very essential for you when you perform the Linksys router setup. Moreover, we also tell you how you can do the Linksys router login through methods. So, we highly recommend you read the post without missing any points. Otherwise, you won’t be able to get the Linksys router setup complete.
Requirement of Linksys Router Set Up
Well, there are many things that you need during the Linksys router setup. Here, we tell you some important requirements that you should get ready for before performing the configuration of the Linksys router. All the requirements are outlined below. You just need to read them out and prepare them.
- You need a stable power connection.
- Constant and reliable speed of the internet
- Updated internet browser
- Note down the default username and password of the router.
- You should know the default IP and web address of the Linksys router.
- A quality Ethernet cable
Thus, these are things that you need to prepare before performing the setup of the Linksys router through different methods. Below we have explained the methods that you need to perform.
Different Methods to Set Up Linksys Router
There are several methods to complete the installation of the router in the house. If you want the successful configuration of Linksys router hassle-free then you need to perform one of the mentioned methods carefully without missing the steps. First, we explain the manual method of setting up the router.
Linksys Router setup Via Manual Method
You need to perform several steps to get the setup successful. All the steps are outlined below:
∙ Unbox your Linksys router.
∙ Power on the router by plugging it into the wall outlet.
∙ Connect the Linksys router with the host modem.
Note: If you use the wireless mode to connect the router then make sure your devices communicate properly. You can also use the Ethernet cable instead. After all, an Ethernet cable makes a strong connection.
- Now, you need to switch on the computer or laptop.
- Launch the updated internet browser.
- Put the default web address into the address bar.
To your knowledge, the default address of the Linksys router is linksysrouterlogin.com and the Linksys extender web address is http://extender.linksys.com.
- Once you type the web address into the address bar and press the Enter key.
- Now, you will see the Linksys router login page.
- Here, you need to fill in the default credentials of your Linksys router.
Note: If you don’t know the default username and password of your Linksys router then you can take the help of the Linksys user manual where you will get all the default information related to the Linksys router.
- Click on the Login button.
- Now, you will see the dashboard of the Linksys router.
Here, you need to follow the on-screen prompts to complete the configuration.
These are the important steps of the manual method that you need to perform. In case you see this method as difficult to perform then you can use the WPS method. The influencing points of the WPS method are outlined below.
WPS Method to Set Up Linksys Router
This method is one of the easiest methods as compared to other methods. The steps are mentioned below. You need to go through the:
- First, you need to power your router.
- Now, close the router and modem from each other.
- Find the WPS button on the router.
- Once you find the WPS button, press it for some time.
- Now, you see that devices are connected properly through the WPS button.
Hence, these are the methods you need to perform to make the Linksys router setup completely hassle-free. Moreover, you can also follow similar steps during the Linksys extender setup.
No comments yet