Insulation Replacement Tips from an Insulation Company in Beverly Hills

The prospect of replacing attic insulation or cleaning your own attic can be intimidating! Most homeowners have never seen their attic, let alone spent a significant amount of time above the ceiling in their dark, cramped attic. So we'll start with the fundamentals. 

Your attic was not designed for anyone who does not know how to Move around safely:

1. First and foremost, you must walk along the floor joists. If you step on the drywall below, there's a good chance your foot will go. If you step on the drywall below, your foot will almost certainly go right through it, taking you with it.
2. Second, attics are small spaces, so be cautious of the roof above. Nails frequently protrude through the roof, and if your head accidentally bumps into a nail or a crossing two by four (24) you can bet it will leave a mark.
3. Furthermore, your attic is typically a poorly lit and dark space. A hanging flashlight or work light will allow you to see your surroundings.
4. Finally, after so many years of neglect, your attic is bound to be dirty and dusty. Prepare to get your hands dirty (gloved hands) in order to complete the task.

If you are looking for a professional Beverly Hills insulation company, visit www.levelupinsulation.com

What tools and supplies are required for attic insulation replacement?

While heavy-duty, commercial-grade equipment is not required, having the right tools will ensure thorough attic insulation replacement.

The type of insulation to be removed will determine the attic insulation replacement equipment and supplies required for your project. Your attic will have one of two types of insulation, sometimes both: it will have previously been insulated with blown insulation or fiberglass batt insulation. Blown cellulose insulation is a loose material that falls apart when picked up and is typically brown or gray in color.
 
Fiberglass batt insulation is most commonly pink or yellow, but it can also be white or brown, and it comes in the form of a thick 4-inch to 12-inch mat of material that is approximately 2 feet wide by 4 feet long.

This is where your preparation and planning will shine! A well-thought-out plan and adequate preparation will safely lead you to a clean attic.

Steps for Replacing Fiberglass Batt Insulation:

1. Set up your tools and supplies in the garage, driveway, or on the lawn.
2. Prepare your workplace and your home.
3. Make a path from your front door to the attic
4. Protective material should be applied to the walls and floor along that path.
5. Install the ladder beneath the attic access.
6. Install the Commercial Vacuum and run the vacuum hose through your house and into the attic.
7. Place garbage bags in your attic.
8. Install a HEPA-filtered shop vac in your attic (without commercial vacuum usage).
9. Wear (don't wear) your personal protective equipment.
10. Climb into the attic and begin the removal process.
11. Roll up each piece of insulation by hand and place it in a waste bag.
12. Begin the commercial vacuum; a helper will be needed to monitor the vacuum while it is running.
13. To clean the attic floor, use the commercial vacuum hose.
14. Vacuum the attic floor with the Shop-Vac (without commercial vacuum usage).
15. IMPORTANT: Take a 15-minute break or when your body temperature reaches dangerous levels.
16. Continue until all of the attic insulation has been removed and the attic has been cleaned.
17. Remove waste bags containing insulation from the attic and place them outside in a dumpster.
18. Take the vacuum, hoses, tools, equipment, and supplies out of the attic.
19. Remove all surface coverings from your home and exit the attic.
20. Clean up the tools, equipment, and supplies, as well as the job site.