Using a jigsaw in my mind is probably one of the less complicated pieces of equipment to get your head round, however we can communicate about the constraints and limitations of the device based on which kind of blade you operate. Some jigsaw blades are designed for ripping wood fast, a few for fine cuts and curves, others are designed for steel! We will cover the ones in this text and the way to use a cordless jigsaw in the proper manner to get a neat end optimistically..

How to use a cordless jigsaw

First things first, make sure your batteries are completely charged. You don’t want to get caught out mid reduce! This is vital as you’re much more likely to tear or harm the wood face edge.

After that we need to decide what we need to reduce. If you’re considering slicing engineered floors I might say cordless jigsaws manage something as much as 20mm without a hassle in any respect. In fact here is a video of a cordless jigsaw making a 20mm engineered board cut:

In my opinion price and overall performance with this is the fine cordless jigsaw money should purchase inside the UK in the intervening time. Makita virtually works on preserving their device proper fee!

How to alternate a jigsaw blade

Before you even dream of getting rid of the blade make sure you disconnect the battery. If you’re using the corded version then unplug it to make sure.

Changing the blade on a jigsaw is without a doubt smooth nowadays. Assuming you've got the Makita DJV180Z 18V Cordless Jigsaw or any Makita or cordless DE Walt for that be counted you actually twist and release the front of the jigsaw blade holder. An image will clean this up.

By default a spring is pulling the discharge arm closed so it is able to cross anywhere. This is powerful so you want to apply a truthful bit of pressure to open it up, however once you do the blade will just drop directly out and you need to hold it open to slide any other in. Release the arm and it’ll all be locked back into place. Make positive you have got driven the jigsaw blade in a way sufficient as that is a not unusual difficulty with a blade truly falling out.

The way to use a jigsaw to reduce a straight line

How immediately do you want the road? You can reduce a pretty straight line by hand. If it’s an exposed end side then I would do one in every matter, both screw a manual in location and comply with it to get an immediate line or perhaps even do not forget a round notice. Quite frankly even though if you watch this video it’s quite easy to truly make your mark, and then observe the reduction straight along. Keep blowing the dirt out your manner as you go. 

The hardest part of following the road is being capable of seeing it. The Makita cordless jigsaw I am using doesn’t have a blower but I understand the DE Walt does. I don’t assume the DE Walt blower is robust enough even though.

The LED lighting fixtures could be brighter too, so ensure your room is nicely lit. I usually live a fragment of a mm outdoor the cuts if I want to, I can use a cordless planer to just tidy up that reduce as properly. You ought to even install use. A cordless router to make a flush trim. You can see 18mm OSB cuts neat enough and that changed into the usage of a difficult blade. You could use a finer blade for a greater delicate reduction. After I quick shot via some 6mm MDF. The cuts are pretty direct if you take a look.

How to use a jigsaw to reduce curves

Cutting curves with a jigsaw is about as smooth as it gets IF you operate the proper blade. So talking approximately the Makita jigsaw, you need the MAKITA A-85709 blades. If you observe those you’ll see there’s now not that tons of intensity. This loss of depth makes them for extra bendy and they may cut a much tighter curve as a result. You can cut circles, profiles, nearly anything with a jigsaw.

Just take your time and as you’re slicing the curve doesn’t push ahead so much as lean round your attitude. The blade will observe. You can always barely live from your reduce line and then cautiously finish up with a belt sander if you don’t have the confidence to move for it directly!

How to use a jigsaw to cut a hole

Cutting a whole or circle in sheet material is exactly similar to reducing a curve however inverse. Simply get yourself a drill and make an entire to get your jigsaw blade in. You may want to do a great deal approximately with plunge cuts however why bother then you could pilot an entire, drop your jigsaw in and start the technique of regularly cutting around your round mark.

Final Verdict

Jigsaws are virtually designed for this and there may be literally no higher tool for larger circles. If it’s a smaller hole you may keep in mind a bore set that suits into a cordless drill but whatever larger one warrants the usage of a jigsaw.

Hopefully this has cleared up a way to best  use a cordless jigsaw. If I’ve overlooked something then ship me a message and I’ll take a look at it for you. Thanks once more and with a bit of luck you presently have an amazing base for using a cordless jigsaw!