Whenever a Linksys router user comes across a major issue, he’s advised to perform a factory default reset. After all, the reset process is the finest remedy to treat issues like the WiFi router not working and Linksys error 2123 in a better way. But, the scenario is completely different, when the table turns opposite instead of turning in your favor. Yes, we’re talking about the case when the Linksys router not working after reset issue shows up. What needs to be done in that scenario? We’re going to discuss this in this article. Read on.
Why is Linksys Router Not Working After Reset?
Getting acquainted with the reasons is perfect what you must do before knowing how to troubleshoot the issue. Well, the primary reason why your router is not working following the reset process is that you are not patient enough. Know that restoring to factory defaults is a complicated process and needs some time to get completed. Therefore, wait for a few moments and let your router boot up. In case that doesn’t happen, there is a chance that you executed the process improperly. Thus, consider redoing it. Following are the steps that will help you reset your router correctly:
- Ensure that your router is powered on.
- Locate the Reset button and press it.
- Wait till your router boots again.
In case your Linksys router has still not returned to its normal working state, then there is a chance that some other factors are contributing to causing the problem. In the next section, we’ve highlighted them along with the fixes to resolve the issue. Also, be alert during the troubleshooting process.
Fixed: Linksys Router Not Working After Reset
- Check the Power Socket
Apart from the incorrect implementation of the factory reset process, the power socket in use can be the reason behind the issue you’re currently facing. Perhaps, when the router was rebooting, a power surge occurred and the socket got damaged. Keeping that in mind, have a good look at the socket supplying power to your router. In case it is found damaged, get it repaired with the assistance of an electrician. You also have the option to connect the router to another socket.
- Connect the Router and Modem
Did you disconnect the router and modem during the reset process? Yes? Then, why you haven’t got them connected after resetting your router? Don’t you know that without connecting both devices you won’t be able to access the linksyssmartwifi web address for the router’s installation process? In light of the same fact, consider connecting your WiFi devices as soon as possible. You can connect them either using a wired source [network cable] or a wireless source [WPS connection].
- Restart the Router
Perhaps, a technical glitch has caught your router’s ability to start. Well, that’s possible because, after the reset process, a networking device enters its most vulnerable state since it operates on the default settings that can be easily manipulated. So, consider getting rid of technical glitches. In case you are wondering about the method to do so, restart the router. For this, power down the router after disconnecting it from the power outlet, waiting for some time and putting it back on power.
- Mend the Router-Modem Distance
Another reason why your Linksys router not working after reset is that the distance between your router and the modem is inappropriate. Let us tell you that if you place these devices too close, then there is a high probability of their signals getting involved in a clash. However, if you are placing them too far, then you must get ready to face other networking problems with your WiFi router. Know that both devices are supposed to share a clear line of sight for proper functioning.
- Update the Firmware
Chances are that your Linksys WiFi router needs an upgrade to get back to work. Therefore, update the firmware to its latest version. You can install the latest firmware on the wireless router by accessing the Linksys wireless router setup wizard. However, you must avoid uploading the incorrect firmware file on your router. The reason being, it may corrupt the router and you’ll be left with no option other than performing a default factory reset and starting from scratch.
Summing Up
The Linksys router not working after reset issue can be a pain in the head if you are not familiar with certain things. We hope that the tricks we’ve highlighted in this post will help you get rid of the problem.
So, what are you waiting for? Customize your networking settings via the Linksys WiFi router setup dashboard and start enjoying its services.
No comments yet