How to connect victony AC1200 wifi extender?

How to connect victony AC1200 wifi extender?
4 min read
28 August 2023

A simple device, the Victony AC1200 WiFi Extender Setup may be plugged into any typical electricity outlet. One of the most basic settings are present. Without a CD, the setup can be completed using a web browser. According to the official Victony website, the extender's dual-band capabilities could allow you to reach a speed of 1200Mbps. The smartphone has four external antennae, which is a special feature that enables it to extend Wi-Fi range while preserving a strong signal. It eliminates existing wireless network dead spots with the help of better wireless coverage.

Victony AC1200 WiFi Extender Setup

Another name for this method of installing a Victony WiFi extender is web browser setup. Use the Victony AC1200 setup a Victony extender by following the instructions below.

  • Your Victony AC1200 range extender works after it is connected into an outlet.
  • Connect the extender to your router.
  • After opening network management, connect to the Victony wifi.
  • Launch a web browser of your choice.
  • Go to the default web address for the ap.setup login page.
  • Create an account if you don't already have one.
  • Select the network that you want to grow.
  • Click the next button.
  • Press the finish button to complete.

Note: If you require any assistance with your wifi extender, please don't hesitate to contact one of our experts or go to the official website for ap extender setup.

VICTONY WIFI EXTENDER via WPS method

You can set up the VICTONY WIFI EXTENDER using these methods.

  • connect your WiFi extender as close as possible to your router.
  • If the power LED is not consistently emitting the same color of light, check it.
  • From this point on, finding the WPS button on your extension and router will be simple.
  • Once you've noticed it, press the button for two to three seconds on each successive device.
  • Your extender and router are now connected if you notice the green light on your extender blinking.
  • You must then wait 10 to 15 seconds for the devices to learn about one another and function normally.
  • On the extender, a solid green LED will illuminate when the connection is made successfully.

How to login to the Victony AC1200 Wifi Range Extender?

To log into the VICTONY AC1200 WIFI RANGE EXTENDER, the initial steps are as follows:

  • First, connect the power supply for your WIFI EXTENDER. Also, in this case, it is not necessary to connect in close proximity to the router.
  • Before turning on the LED indicator, which at this stage should be a solid green color, give the extender some time to properly ramp up.
  • After that, access the WIFI manager using a computer, laptop, or smartphone. In addition to adding your extender to the network that it already belongs to, the network will eventually become insecure.
  • Your network connection has been established successfully. Open your favourite browser and go to the URL bar. The URL for the web page must be copied and pasted. To finish the process, press the enter key on the keyboard.
  • The next step is to enter your login details. To do so, just type "admin" into both of the fields on the login screen. After that, you will be sent to a dashboard after logging in.

Victony AC1200 extender Firmware update

  • Begin by turning on your Victory extender.
  • Any smartphone will work.
  • Visit ap.setup right now.
  • Select Settings from the menu.
  • At this point, click the Firmware Update button.
  • Follow the instructions displayed on the screen to complete the update process.
  • Throughout the process, keep your booster plugged in.





In case you have found a mistake in the text, please send a message to the author by selecting the mistake and pressing Ctrl-Enter.
ap setup 2
Joined: 10 months ago
Comments (0)

    No comments yet

You must be logged in to comment.

Sign In / Sign Up