Wavlink WING 12M Extender setup

Wavlink WING 12M Extender setup
4 min read

This is one of the Wavlink Wing AC1200 12m Setup best signal extenders available.These extenders are capable of sending data at speeds of up to 300 Mbps thanks to their 2.4 GHz CPUs. They are a fantastic option for any kind of modem because of this.The Wing AC1200 12m series by Wavlink has the best specimens.

The Wing AC1200 12m makes it simple to attach to all of your electrical devices, including Alexa, desktop and laptop computers, Roku players, smartphones, and more. As a result, you are free to use it however you like, whether that be to play online games or view premium movies.

Installation of Wavlink WING 12M

The Wing AC1200 12m Range Extender Instructional Guide:

  • Connect the Wing Extender to the wireless devices.
  • Enter ap.setup or the IP address 192.168.10.1 to open the browser.
  • Log in with the default username and password to view the setup page.
  • The repeater scans the surrounding area for warnings.
  • To choose your home's WiFi network, click it.
  • Select Next after entering the WiFi configuration.
  • Wait 30 seconds before connecting your amplifier to your home network.
  • The Wing 12m Extender devices has now been fully installed.
  • Place the extender close to the area without internet to improve connectivity.

Note:- If you need any help regarding your wavlink wing 12m extender so contact our technician or visit the official website that is ap.setup.

Wavlink WING 12M Extender manual setup

how to access the Wing 12m wifi extender's manual setup page:

  • After opening the box, the Wing 12m extender needs to be put into the outlet.
  • As soon as the power LED light turns green, press the power button.
  • Now connect your WiFi device to the Ap extender setup _Ext network.
  • Type Ap.setup into any open web browser.
  • You are currently on the Wavlink Wing 12m Ac1200 setup page.
  • Follow the AP Login steps after creating your account.

WPS Setup for Wing 12m wifi extender

During installation, using the wireless protected setup (W.P.S) button to link the extender to a current wifi network is one of the most common methods to do so.

  • Set up your Wing ac1200 in accordance with the following instructions to install the extender:
  • As a first step, position the extra cable close to the main wifi modem or router.
  • Right now, the Wavlink wireless extender is operational.
  • then keep an eye out for an important green power benefit to emerge.
  • Press the W.P.S button to turn the extension's power light on.
  • Now press the W.P.S icon on the router or modem.
  • The green indication on your router and extender is blinking.
  • Give the extender and house wifi 1-2 minutes to connect.

How do i login wavlink Wing ac1200  extender?

  1. Launch a web browser if you like.
  2. Use 192.168.10.1 instead, which is the Wavlink Wing 12m Extender's IP address.
  3. All users are managers because ap.setup allows users to enter their username and password here.
  4. Following that, checking the options will be easy for you.

procedure for Reseting Wavlink Wing 12m

Do you need to reset your Wavlink Wing 12m Extender?When a user loses their admin password, they frequently carry out a factory reset process. Once you've finished, your expansion will be prepared for a fresh installation.Keep in mind that a factory restart will delete all of your tailored tastes, including your account and password.

Follow these instructions to reset your Wavlink Wing 12m Extender:

  • After placing in your Wavlink Wing 12m, switch it on.
  • Before moving forward, wait until the green light is solid and consistent.
  • Find the hole for the factory restart.
  • It might be reachable from the edge of the extender.
  • Pick up a sturdy paperclip or pin.
  • Insert the paper clip or pin into the hole, then keep it in place for 8 to 10 seconds.
  • Remove the paper clip when the power indication is a solid shade of green.




In case you have found a mistake in the text, please send a message to the author by selecting the mistake and pressing Ctrl-Enter.
Comments (0)

    No comments yet

You must be logged in to comment.

Sign In / Sign Up