What materials can be used for blow moulding?

Gregsam Gregsam 13 December 2022 Follow
What materials can be used for blow moulding?

What Materials Can Be Used For Blow Moulding?

Choosing the material for your blow moulding needs can be a daunting task. There are a wide variety of materials available. Some are specifically made for use with food products. Others are better suited for other applications.

Extrusion blow molding

Several materials are used for blow molding, including LDPE, HDPE, and polyolefins. Each type has a variety of processing options, which must be considered before productionlike in  Plastic Pallet.

Multilayer structures are important for food packaging. These isolate the resin from the rest of the plastic recyclate, which can contain contaminants. In addition, they help to increase productivity.

PET is a widely used polymer for plastic packaging. It has the ability to form hollow containers. However, it has not been possible to make cosmetic or drug containers from PET.

Copyright TechPlanet.today

PET is a good choice for extrusion blow molding applications. Its viscosity is not dependent on shear rate. The melt strength ranges from about 1.0 to 2.0, which is acceptable for these applications.

Depending on the application, some resins may need to be dried before processing. The cost of materials also needs to be considered. Blow molding companies often use large quantities of resin. This makes it possible to save raw material.

Some resins have been modified for electrical insulating materials and chain branching agents. The dye receptivity of polyesters has also been improved.


image source: https://www.pinterest.ph

Predetermined material distribution

Using a simulation model, the properties of a blow molded container can be calculated. These properties include the size of the container, the stacking ability of the container, the pressure distribution, the material distribution and other properties. The simulation model takes into account the flow cross sections of the blow molding gas, the position of the stretching rod and other influencing factors. The simulation model can also incorporate the properties of the actual blow molded container.

The simulation model can be used with or without expert knowledge. For example, if the simulation model can show how a container behaves under pressure, then the control device can use this information to make an informed decision on how to change a parameter in order to achieve the desired result.

In addition to the properties of the actual container, the simulation model can evaluate the predetermined material distribution. This includes the material properties of the thermoplastic material, the volumetric flow of the blow molding gas and the interactions between the pressure and other influencing factors. The simulation model is also able to estimate the size of the container, the stacking capability of the container, the pressure distribution, the gripping strength and other relevant properties.

Two-stage and single-stage methods

Whether you are a plastic product manufacturer of 70mm PE Plastic Marine ball Toy ball or a consumer, there are several ways to make containers for your needs. A few of the most common methods include blow molding and injection moulding. These methods are both used to produce containers of varying sizes, shapes, and colors. Plastics are used to hold a variety of products, from food containers to household cleaners. Blow molding is a method of creating containers by injecting a pressurized gas into a preform, which then expands to form a finished product.

Blow molding is used for a variety of applications, including plastic food containers, sports drinks, household cleaners, and agricultural containers. It has many unique applications, and requires the right tools and equipment. In addition, the process can be broken down into several stages. It can also be used in conjunction with other techniques, such as injection moulding.

Blow molding is used to create containers of varying sizes, shapes, and materials. It is commonly used in conjunction with injection moulding to produce sports drinks. However, the process is often used by manufacturers for other purposes.


image source: https://www.pinterest.ph

Plastics that are suitable for contact with food

Those working with plastics should familiarize themselves with the different kinds. Some can be difficult to work with, while others are easy to melt like  PE Plastic Double L Ring Drums/Barrels. You must test each type before processing. Also, you should avoid mixing different types. This is because it will reduce the quality of the product. You should also check with your country's sanitary authority for approval.

Most plastics that are suitable for contact with food are made of polyolefins. These include polyethylene and polypropylene. These two types of plastics have great chemical and scratch resistance. They are also available in different colors. They are also known for being reusable.

Another type of plastic is polystyrene. It is commonly used for toys and other products. This type of plastic is also known for its rigidity. It also provides great visibility for products.

Another type of plastic that is suitable for contact with food is polyvinyl chloride. It is used to make food foils and other products. It is also used to make bubble wrap. This type of plastic has high temperature resistance. It also provides a good moisture barrier.


In case you have found a mistake in the text, please send a message to the author by selecting the mistake and pressing Ctrl-Enter.

Comments (0)

    No comments yet

You must be logged in to comment.

Sign In / Sign Up