Extracting cannabis involves isolating essential substances from the plant, such as cannabinoids and terpenes. The many solvents used for this separation include butane, ethanol, water, propane, and CO2. If not carried out according to the right conditions and guidelines, some of the processes constitute safety risks.
Using appropriate SOPs (standard operating procedures) and safety equipment is crucial. In addition, containing this process in a hazardous site is dangerous and volatile. That's where custom-built C1D1 and C1D2 extraction labs come in. These labs are specially built to withstand these extractions. This article will highlight some of their features.
Features of C1D1 And C1D2 Extraction Labs
Custom-built C1D1 and C1D2 extraction labs come with some necessary features that help make extraction secure and safe. Here are some of them:
Extraction Labs
The lab itself is the first component. The procedures and solvents are mainly contained in these dangerous areas. The laboratories are constructed of steel, which will confine the fire and explosion in the event of an accident. The most frequent steel gauges used to build laboratories are 18 and 20 gauge. The steel is formed into interlocking "sandwich panels," which can be either a single wall or two panels separated by insulation. Additionally, the extraction labs have explosion-proof components, such as lights and electrical outlets.
Alarms
Alarms are included in custom-built C1D1 and C1D2 extraction labs. These alarms have inside-the-room and outside-the-room audio and visual warnings. The alarms will sound in the event of an explosion, fire, or a required purge due to high gasses. The visual alarm and strobe lights alert that the room is being purified or the power of equipment running within the lab is being turned off. Audio alarms will also sound to alert the operators to what's happening.
Ventilation
A specific air volume must be turned over or replaced every hour in C1D1 extraction labs. This air exchange removes some of the gasses heavier than air from the lab. These continually operating fans bring in clean air and exhaust the air already in the space. Emergency purge fans are also available, which remove the air from the room and replace it with fresh air outside the dangerous space.
Final Thoughts
Custom-built C1D1 and C1D2 extraction labs are specially designed to enhance safety during the extraction of hemp, cannabis, and other plant-derived products. Hence, it's crucial to choose a manufacturer that can help make this process smooth and help construct an extraction lab that will comply with all standard operating procedures.
No comments yet