Another well-liked 3D printing substance is PETG, or polyethylene terephthalate glycol-modified. The letter "G," which stands for the glycol alteration that lowers PETG's melting temperature and makes it simpler to 3D print, is the primary distinction between PETG and PET.
Similar to its base material, glycol and terephthalic acid, which make up PETG filament, are mainly derived from crude oil. To make raw PETG plastic, these chemicals must first be removed from the oil and heated before being combined. Even though oil isn't the greenest resource, many recycling facilities accept PETG, so this particular sort of plastic isn't entirely bad for the environment.
PETG should be your next filament challenge to try after mastering PLA filament. With the exception of the glycol addition for better printability, it is quite identical to the plastic used in water bottles and food containers. PETG filament outperforms PLA filament in the majority of crucial areas. And because it is slightly tougher, has much more heat resistance and has good creep resistance It is suited for practical 3D printing.
However, printing it is also a little bit more challenging, which is not a terrible thing entirely. Getting messed up with PLA filament prints from a well-tuned printer is practically impossible. However, getting PETG prints right calls for a deeper knowledge of slicing software and first-layer calibration. This enables the filament to serve as a secure learning environment for these ideas, which are essential for understanding other technically difficult 3D printing materials.
Additionally, PETG filament is rather hygroscopic, so if you are in a humid location, drying it before printing is necessary. The prints themselves won't absorb moisture, but a wet filament will interfere with extrusion and lower print quality. If the first layer is printed too closely to the build surface, the material can permanently attach to the majority of 3D printing surfaces.
The molten filament is a bad choice for bridges and steep overhangs because of its sticky, viscous character. Despite the low printing temperature, this also results in the best layer adhesion.
PETG Filament qualities
- Good Printability
- Good Color Scheme
- Average Heat Resistance
- Good Tensile Strength
- Good Toughness
- Excellent UV Resistance
- Poor Moisture Resistance
- Good Creep's resistance
When to use PETG Filament
PETG is basically the middle ground between PLA and the far superior ABS filaments. Even though it doesn't have ABS's better temperature resistance, it is nevertheless suitable for prints that are utilized in outdoor spaces or on automobile interiors. Additionally, it is significantly more durable than PLA, making it perfect for applications where impact resistance is required. Because doesn't creep, it's perfect for both functional prints and 3D printer parts.
Visit here: https://www.youtube.com/watch?v=nRDEBFr_J7Q&t=104s
No comments yet