A Nextbox Wifi Extender setup enables you to take advantage of all the standard and advanced advantages of a typical Wifi extender. Furthermore, setting up the Nextbox wifi extender is fairly easy, so you don't need to be a tech expert to do it. There are different ways to set up a Nextbox range extender. You can choose any one of the methods based on its viability. In both cases, the performance and output are essentially the same.
- Configuring an extender with a web browser
- Configuring an extender using the WPS button
Steps for Nextbox Wifi Extender Setup - Web Browser Method
To finish the setup process, you'll need a browser and a steady internet connection;
- Connect the wifi extender to a wall outlet.
- The device's LED lights should turn on once the Power button is pressed.
- You must join the extender's wireless network after turning it on before you can use your computer or any other device.
- A default network name is present on every Next Box WiFi extender (SSID).
- Therefore, search for it in the list of available WiFi connections before connecting.
- Open your preferred web browser and type the IP address 192.168.1.250.
- You can also go to mywifiext.net as an alternative.
- The Nextbox extender's New Extender Setup page should be visible there.
- Accept the terms and conditions here by selecting the New Extender Setup option.
- Now configure your Nextbox extender credentials. You will be granted admin rights, which you can use later to access the settings or to troubleshoot your Nextbox wifi extender.
- Any username is acceptable, but "admin" is recommended. Additionally, be sure to choose a password that differs from your current WiFi password.
- You will then be required to respond to a few security questions. Since you'll inevitably forget your password, choose questions that are simple to answer.
- Choose two questions from the drop-down menu. If you forget your password or admin credentials, these questions will aid in their recovery.
- The Nextbox website will prompt you to use the NETGEAR Genie after you click Next. Select Yes or keep going.
- The extender will start looking for nearby WiFi networks as soon as you keep going. The radio buttons for the 2.4GHz and 5GHz network names are located here. You occasionally might not see the name of your wifi network. In these situations, select See More, then select Next.
- Now, enter the network password you currently use, and click Next. Choose the extender's network SSID and password here. The default network names for both bands are 2GEXT and 5GEXT. The initial passcode for both bands is the same as the one you currently use for connecting to your network.
- The WiFi connection name and password can be the same if you have a mesh extender. You must choose the Enable One WiFi Name option to do that.
Steps for Nextbox Wifi Extender Setup - WPS Method
- It is very practical, especially if you have a lot of passwords and login information to manage.
- Once you click Nextbox WiFi range extender will begin applying these settings to the Nextbox WiFi Range Extender. You need to hold out for a while here. When the procedure is finished, you can view the WiFi network name and password for each band.
- By entering these credentials, you can now connect your devices to the extender device. Return to your browser now and select the box on the bottom page. As a result, it will start expanding your network's signal coverage.
- To connect to the extender, use the new extender ID and the old WiFi password.
- Once finished, you can put the extender just about anywhere.
Wrapping Up!
The Next box wifi extender setup is simple and easy. The two methods above should therefore enable you to quickly improve your signal strength and WiFi speed with just the extender device. For any query related to Nextbox extender then you can visit our website- www.wirelessextendersetup.org
No comments yet