Whether you're planning to install an Automatic Air Vent Valve (AAV) or repair a faulty one, there are several important things you should know.
Source: https://i.pinimg.com
Removing air from a water supply pipeline
Getting air into your water supply pipeline is a problem that can be easily fixed. This type of problem can occur after a new plumbing installation or even after repairs to your central plumbing system. If you are experiencing this problem, you should contact a professional to get the job done right.
If you have a lot of air in your water line, it could cause serious damage. In some cases, the air can be forced in from pumps or even through faulty check valves.
If you are experiencing loud thumps or gurgling noises in your pipes, this is likely the result of trapped air. Air can also get trapped at high points in your system. This can lead to major damage to your Flow Control Valve and fittings.
You will need to shut off the main water valve to force the air out of the line. This is the first step in fixing air in a water supply pipeline. It is best to start with the faucet furthest from the water supply valve.
Source: https://i.pinimg.com
Repairing a leaky air bleed valve
Whether you're a mechanic, a homeowner, or just a car enthusiast, you're likely familiar with air bleeders. These are small, round handles that are attached to radiators. They're used to bleed air out of the system during filling or draining. They're a fairly easy fix. You can clean the valving off with vinegar, or replace it.
These Automatic Control Valve are typically installed with the first installation of a system. They're durable, and are usually reliable. However, they can also leak or block. If the air bleeder is blocked, you can manually dump enough air to get the system going again.
A leaking air bleed valve is a sign that your system is not working as it should. It may be caused by a blockage or a defective valve. It's also a good idea to inspect other components in your system.
A leaking air bleed valve may also be caused by a faulty radiator valve. If you're unsure, call a heating service technician. These technicians will know exactly how to force air out of your system.
Installing an AAV
Using an air admittance valve (AAV) can be a great way to solve a back-pressure problem. Back-pressure occurs when waste water and water from a drain is forced down a drain line. Eventually, it can cause poor drainage. It can also occur when a washing machine or drain pump is emptying under pressure.
Back-pressure can occur when a trap downstream from an AAV Pressure management valve becomes clogged with debris. It can also occur when an AAV is installed too far away from a building vent system.
AAVs have the ability to be installed on the roof, as well as inside a house. They provide greater flexibility in the layout of plumbing fixtures. They also require less labor and materials to install. They are also a more economical option than vent pipes.
AAVs are typically available in different sizes. They can be installed to vent individual fixtures or entire stacks of vents. They are certified and rated for various types of environments. Using an AAV instead of vent pipe can reduce long-term roof maintenance and reduce the risk of leaks.
No comments yet