Looking to change the belt on your bissell vacuum cleaner? Here's how to do it!
Bissell belt replacement
If your Bissell belt has come off, torn, or become unusable, it's time to replace it. Here's how to do it:
1. Unplug the vacuum cleaner and remove the screws that hold the cover in place.
2. Lift off the cover and locate the belt housing.
3. Remove the old belt by undoing the screws and pulling it off of the motor shaft.
4. Place the new belt on the motor shaft in a reverse pattern to the old one, then reattach the cover and screws.
Belt not turning?
If your belt is not turning on your Bissell vacuum cleaner, there are a few things you can try before calling a professional.
1. Check to see if the belt is fully engaged by turning the machine on and checking thebelt for movement. If it is not moving, make sure the belt isnot twisted or kinked.
2. Test the vacuum cleaner by putting some dirt in the canister and turn on the vacuum cleaner. If the belt is turning,it should move the dirt around. If it does not turn, it may need to be replaced.
3. If neither of these solutions work, you may need to call a professional to fix your vacuum cleaner’s belt.
Belt is too tight?
If the belt on your Bissell vacuum cleaner is too tight, it may be causing problems. The belt helps to power the vacuum cleaner and help it move around the house. If the belt is too tight, it can cause damage to the Handheld vacuum cleaner. In order to fix a belt that is too tight, you will need to take it off and adjust the tension.
image source: https://www.pinterest.ph
Belt is too loose?
If the belt on your Bissell vacuum cleaner is too loose, it may not be able to effectively clean your carpet. A properly tensioned belt will keep the dirt and debris attached to the roller and spin it rapidly across the surface of the carpet, pulling up more dirt and debris. If the belt is too loose, it may become stretched or damaged over time and eventually fail. In order to tighten the belt on your Bissell vacuum cleaner, follow these Vacuum cleaner Supplier simple steps:
1) Locate the Belt Tensioner Assembly on your Bissell vacuum cleaner. It should be located near one of the rear wheels.
2) Remove the old belt by gently pulling it off of the roller. Make sure to hold onto the ends of the belt as you remove it in order to avoid losing any of the dirt and debris that was stuck to it.
3) Replace the old belt by gently pressing it onto the roller. MAKE SURE TO PULL THE BOTTOM OF THE BELT TENSIONER STRAP UP TO ACTUATE IT.
4) Verify that the Belt Tensioner Assembly is in correct position by depressing down on one side of it with a finger. The assembly should spring back into
Belt needs replacing?
If your belt needs to be replaced on your Bissell vacuum cleaner, follow these simple steps:
1) Unplug the vacuum cleaner and remove the dustbin.
2) Remove the screws that hold the belt in place.
3) Lift off the belt and replace it with a new one.
4) Replace the screws and re-install the belt.
Belt doesn't turn?
If your belt doesn't turn on your Bissell vacuum cleaner, there is likely something blocking the belt from turning. One common issue is a hair or debris lodged in the motor, preventing the belt from turning. To fix this problem, you'll need to remove the obstruction and replace the belt. Here are instructions on how to do it:
1. Turn off your vacuum cleaner and unplug it from the power outlet.
2. Remove the screws that hold the bottom cover in place.
3. Lift up the bottom cover and remove it from the vacuum cleaner.
4. Check to see if there is anything obstructing the belt from turning - hair, debris, etc. - and remove it if necessary. If there is nothing obstructing the belt, proceed to step 5.
5. If there is something obstructing the belt, take a look at the motor area to see if you can see where it's caught on something (like a screw). If you can't see where it's caught, use a screwdriver to pry up on one end of the obstruction and watch as the belt turns - once you find where it's catching, use a knife or scissors to cut through whatever is holding it in place
Belt is broken?
If you've got a bissell vacuum cleaner and your belt is broken, you might be wondering how to fix it. This guide will show you how to change the belt on a bissell Wet&Dry vacuum cleaner.
First, unplug your bissell vacuum cleaner. Then, take off the bottom cover by pressing down on the tabs on either side and pulling it off. Next, remove the screws that hold the main part of the machine together and pull it down. You'll now see the belt drive. Take out the old belt and replace it with a new one, making sure to follow the instructions that came with your new belt. Put everything back together and screw it back in place. Plug your bissell vacuum cleaner back in and test it out!
image source: https://www.pinterest.ph
belts don't last long?
Belt life on a Bissell vacuum cleaner can be shortened quite a bit if not properly taken care of. A belt will wear out after time and with regular use, it will become noisy and start to fray. Here are a few easy steps to keep your belt lasting as long as possible:
1. Check the belt tension regularly
Belts should be checked for tension often, especially if the vacuum has been used recently or during particularly heavy cleaning sessions. Altering the belt's tension can help to extend its life as well as keep the motor running smoothly.
2. Keep the vacuum clean and free of debris
A dirty vacuum will cause the belts to heat up and wear more quickly. Additionally, avoid using harsh chemicals or cleaners on your vacuum; these can damage the belt and cause it to break down prematurely. Instead, use a mild detergent and water solution or a Bissell air freshener spray.
3. Replace the belt when it starts to show signs of wear
When the belt reaches about 80% of its original length, it's time to replace it. If you notice any fraying, cracking or noise when you move the vacuum around, it's probably time for a new belt!
how to replace a bissell belt
If you are like most people, your Bissell vacuum cleaner belt has probably been around for a while and just needs to be replaced. Here is how to replace your belt on your Bissell vacuum cleaner.
No comments yet