How to Replace a Window Pane?

How to Replace a Window Pane?
3 min read

Windows are one of the essential elements of your home. In addition to serving vital aesthetic functions, they are functional, providing cross-ventilation and maintaining energy efficiency. Although replacing the glass in a window may cost less than a complete replacement, doing the job is not easy. It includes high-tech insulating glass that can break and lose the seal between the panes, causing it to fog up permanently. Permanently repairing a broken window is not always possible, but a temporary fix helps keep the weather and pests out while you contact experts for window repair in Sacramento. Window glass replacement requires detailed attention.

Here are the steps to replace a window pane.

  1. Remove the Glass

Wear your gloves and safety eyeglasses to remove the broken pane and remove the glazing material to take out the glass pane. Use gloved hands to wiggle the glass stuck in putty. You can use a knife to scrape off old glazing putty. If it’s tough to get off, use a heat gun to warm it up to remove the remaining glass bits.

  1. Tape an X on broken pane

It is imperative to tape the window pane with an X on both sides to prevent glass bits from falling. Use duct tape to make an X across each side of the pane for the glass to stay intact when you break it. You can use a hammer or a screwdriver to break the pane.

  1. Apply Putty

Knead a little putty until it is warm and flexible into a fine rope. It should be pressed into the rabbet's corner. To create a narrow bed of putty for the glass to rest against, use a putty knife to press it firmly into place.

  1. Fix New Glass Pane

Apply a layer of caulk on the window lines to ensure you seal them properly against the weather. Get your replacement glass panes and fix them in the glazing points applied two on each side to hold it firmly.

  1. Smooth the Putty and Pain

Use your putty knife and smear the glazing. If there's excess putty after smoothing, use a dry cloth to remove it.

Wait a few days to let the putty dry before you can paint it with an oil-based primer. After the primer dries, paint to finish off the window frame.

Conclusion

While it may seem easy to do yourself, it can be stressful. It involves using safety gear, including eye protection and cut-proof gloves to protect your hands and cover your wrists. Replacing window glass should be done by experts in window glass replacement in Sacramento because it is essential to get accurate measurements for replacing a window pane.

In case you have found a mistake in the text, please send a message to the author by selecting the mistake and pressing Ctrl-Enter.
Central Glass Inc 0
Are you looking for cost-effective window repair, maintenance, and installation services? If that's the case, your search is over! We take pride in offering ser...
Comments (0)

    No comments yet

You must be logged in to comment.

Sign In