It may be time to repair or replace your attic insulation. This thought has come to your mind since your Pomona home is not getting warmer in the fall. Contemporary homes often have either blown-in insulation or fiberglass batt insulation. On the other hand, ancient building structures carry asbestos insulation.
The asbestos insulation removal process demands the professional hands of a reputed Pomona insulation removal service. It will be a wise decision to visit www.atticprime.com. The concerned website can assist you in making insight into attic insulation removal processes.
Identifying Insulating Types
It's critical to determine the insulation category your Pomona property had installed before. Check it before you start removing any attic insulation. The loose-fill insulation known as blown-in cellulose is often brown or grey in appearance. When touched, the substance itself is soft and delicate.
The thickness of fiberglass batt insulation comprises mats. It measures two feet in width and four feet in length. The range varies from four to twelve inches. These boards typically come in shades of white, yellow, pink, or brown.
Attic Insulation Removal Process (Fiberglass Batt Insulation)
- Set up all the essential equipment in your driveway, yard, or garage.
- Get your Pomona home ready for the upcoming mess. Clear away from your front entrance to the attic access. Further, use tarps to cover the floor and walls of the area in question. Ensure that the coverings are securely taped. Last but not least, install the ladder below the attic access.
- If you have a vacuum cleaner of commercial quality, set it up properly. Attach the vacuum hoses to the attic. Put your unused HEPA-filtered shop vacuum, vacuum bags, dustpans, and rakes in the attic.
- Put on your safety gear.
- Enter the attic to start the removal process.
- Manually remove each insulation piece. Place the debris in the vacuum bag.
- You'll need someone's help to keep an eye on the insulation removal vacuum. It applies to a commercial-grade apparatus.
- Clear the attic trash using the vacuum cleaner, dustpan, and rakes.
- Keep going until the attic is clean and all insulation debris has been removed.
- Put the soiled and outdated insulation in the trash bin for recycling.
Attic Insulation Removal Process (Blown-in Insulation)
- Set up all the necessary appliances in your backyard, driveway, or garage.
- Get your Pomona apartment ready for the removal process to begin. Make a way from your front entrance to the attic entrance. Then, use the floor and wall covers to wrap the attic walls and floor. Bind the covers with tape. Finally, place the ladder beneath the attic entrance.
- If you're using a vacuum cleaner of commercial quality, configure it and run the hoses to the attic destination. Put your HEPA-filtered shop vacuum, rakes, vacuum bags, and dustpans in the loft if they are unutilized.
- Strap the safety gear on your body.
- You'll need an assistant to guard the insulation removal vacuum provided if you're employing a commercial-grade instrument.
- Step into your attic to start taking stuff out.
- Apply the vacuum to remove all the old wall insulation. The dustpans and rakes will be useful for clearing the debris and packing the vacuum bags.
- Continue the removal process till all the insulation and debris have not been cleaned.
- Dump the contaminated, obsolete insulation in the trash box and call the recycling services.
Conclusion
Attic insulation removal can be uncomfortable and unpleasant. Make sure you stop and get some fresh air every quarter of an hour or so. It will keep your body temperature at an optimum level. However, DIY methods are always hazardous. Feel free to contact Attic Prime Pomona and seek their assistance. The Company offers you the best attic insulation removal services at reasonable costs.
No comments yet