Linksys Velop Setup Printer

Smooth connectivity between your devices is crucial for work and leisure in this day and age. A trustworthy network option for your house or company is offered by the Linksys Velop setup printer mesh Wi-Fi system. Once a configured printer is incorporated into your Linksys Velop network, you may print easily from any device connected to the network.

Setting Up Using WPS (Wi-Fi Protected Setup)

Using WPS (Wi-Fi Protected Setup), connecting your devices to your network is quick and easy. This is a basic printer setup manual for the Linksys Velop.

• The printer can be turned on by plugging it into a power supply.
• Put the printer in a position where your wireless router can see it.
• The WPS button on your printer should be pressed and held until the light starts to blink.
• Press and hold the WPS button as soon as your router's light starts to blink.
• Wait for the printer's network connection to establish. After the printer is connected, the light should either stop blinking or turn solid.
• Configure the printer driver program on your computer. Usually, the printer manufacturer's website has the driver software.

If you have any problems setting up your Linksys printer, check out the user manuals for both your printer and router, or contact the technical support teams of the individual printer manufacturers..

Setting Up Using the Web-Based Method

Yes, this is a straightforward how-to manual for setting up a wireless printer.

• The printer can be turned on by plugging it into a power supply.
• The printer may be turned on by inserting its power cord into an outlet.
• Start a web browser on a PC connected to your Linksys network.
• In the address bar, type "extender.linksys.com" or the router's IP address, which is usually 192.168.1.1.
• When prompted, provide the router's username and password.
• Search for the "Print Server," "Network Attached Storage (NAS)," or "Printer Settings" area. Depending on the kind of network you have, the printer settings could be located differently.
• Select the "Add Printer" option or a similar menu item by clicking.
• Input your printer's password and Wi-Fi network name (SSID).
• From the menu, choose either "Save" or "Apply". It should now be possible for your Linksys router to identify your wireless printer.
• Attempt to print a sample page from your computer or smartphone. If printing is available, your printer and Linksys network are properly linked.

Reset Linksys Velop printer :

• Allow the Linksys Velop printer to take its time to fully start up after turning it on.
• Five to ten seconds should pass as you press and hold the printer's reset button.
• To let you know that the reset procedure is underway, the printer's LED lights will occasionally blink or flash.
• Watch for the LED lights to harden and stop blinking after the reset is finished.
• You must reconfigure the printer using the Linksys app or online interface when it has restarted.

Linksys Router to wireless Printer Connections:

• The printer can be turned on by plugging it into a power supply.
• Start a web browser on a PC connected to your Linksys network.
• Input the IP address of the router, which is usually 192.168.1.1, into the address bar.
• When prompted, provide the router's username and password.
• Where the printer settings are situated may vary depending on the type of router you have.
• Make sure you look in the areas marked "Print Server," "Network Attached Storage (NAS)," or "Printer Settings."