Whether you're repairing your own walls or hiring someone else, there are a few things you need to know about drywall repair service spokane valley. The main thing is to know what to do if you spot a problem. Then, you'll know how to fix it and avoid problems later on.
Fixing hairline cracks
Whether you are fixing hairline cracks in drywall or just re-painting a room, there are a few things you need to know before you start. The first thing you need to do is check the severity of the crack. This will help you decide whether it is a serious structural problem or not. If it is a very large crack, you may need to have a structural engineer come to your house to repair it.
If you are just looking to fix the crack, you can try using a putty knife to spread some drywall joint compound over the crack. This should be done at a slight angle so you can spread the compound in two to three layers. After the compound is dry, you can paint the wall in the same color as the rest of the walls.
Filling deep holes
Fortunately, there are a few ways to repair a large hole in drywall. These include spackling and patching plaster. The methods will vary depending on the size of the hole. Small holes are quick and easy to fix, but larger holes require more work.
First, trace the hole with a utility knife. This will help ensure that you are covering the right area of the wall with the patch.
Once you have finished tracing, you will need to remove the debris from the hole. You may also need to sand the edges of the hole. Sanding will help the patching materials adhere to the wall.
Next, you will need to cut a piece of drywall larger than the hole. The piece should be about twice the size of the hole.
Fixing foaming in walls
Using polyurethane foam to fill in holes in plywood is an obvious upgrade to consider. While it's not for everyone, it's one of the few items a homeowner can tackle with relative ease. While this nifty-looking material isn't going to replace your wood-filled walls, it can help give your home an upgrade akin to a car re-painting job.
The most important step is to measure the diameter of your hole. This will help you decide what quantity of foam to order. As a rough guideline, it's not unusual to use up to five gallons of foam in one fill. The best part is that it's easy to apply and can be done in under an hour. The key is to not overdo it, though. The last thing you want is to end up with a wall of foam.
Cost
Several different factors affect the cost of drywall repair. Depending on the severity of the damage, a professional repair may cost between $100 and $400, while a DIY repair may cost less.
In addition to labor, materials may also be needed. A kit usually includes spackle, sandpaper, a putty knife, wood and tape. These kits can cost less than $30. Depending on the job, it may also be necessary to buy wall texture to match the existing wall texture.
Depending on the severity of the damage, professional contractors charge between $150 and $375 per hour. They may also charge by the square foot for larger repairs.
Homeowners can also make minor drywall repairs themselves. These repairs can be done with the right tools and knowledge. Small holes can be repaired by a handyman, but larger holes may require more materials.
No comments yet