ij.start. One of the most well-known printer manufacturers in the world, Canon is a company that owns a website. What advantages does this platform offer, then? You can utilise this platform to quickly and easily get any Canon printer or a quick setup guide for that matter.

We will demonstrate how to utilise Canon.com/ijsetup in this post. Visit the Canon website for simple, step-by-step instructions on how to connect or configure your printer with your PC or computer without the assistance of a tech specialist.

What is  Ij.start.canon Setup?

One of the best online resources created by Canon for its consumers is ij.start.canon, where users can acquire step-by-step instructions for setting up a Canon printer. Reading online manuals will help you quickly learn more about Canon goods, including suggested features.

The website also offers rapid access to a variety of additional useful features, such as Frequently asked questions and answers.  Put each of the features to use. We'll include every position you may access on the ij Start Canon platform here.

How to install a printer

Get the printer ready.

1. Set the printer down on a level, horizontal surface without any obstructions in front of it. Extend the paper support after opening the rear tray. Extend the Output Tray Extension after opening the Front Tray.
2. Connect the other end of the power wire to a wall socket and plug it into the printer's rear.
3. To activate the printer, press the POWER button.
4. Remove the top cover (A). Moving to the middle is the Print Head Holder.

Setting up the print head

1. Take the Print Head out of the packaging.
2. Take off the print head's orange protective cap(A) and throw it away.
3. Push the Print Head Lock Lever up firmly until it stops. There may be a weight to the Print Head Lock Lever.
4. Place the print head in.
5. Push the print head into position to keep it there, then carefully lower the Print Head Lock Lever.
6. Verify that the Print Head is properly placed.

Put the ink tanks in place

1. To completely remove the protective film, pull the orange tape in the direction indicated by the arrow.
2. Twist off and throw away the orange protective cap (B) that is attached to the ink tank's base.
3. Place the ink tank in the right-hand slot and press the ink tank's mark to secure it in place.
4. Ensure that the ink lamp is red-lit.
5. Snap the Top Cover shut.
6. Hardware installation is finished.

linking your ij.start.canon printer to your computer

Please follow the steps below to connect your printer to your computer:

Step 1: Open your browser and navigate to

step 2: Click [Set Up] in.

Step 3: Choose your product and area.

Step 4: Select your operating system by clicking [Connecting to a Computer, Smartphone, or Tablet].

Step5: select [Set Up].

Step 6: select [Download].

Step 7: Once the file has been downloaded, open it and select [Start Setup].

Step 8: Continue the setup by following the on-screen directions up until the Select Connection Method step.

Step 9: Pick a printer connection method from the list below, then click [Next].

Wireless LAN Connection
Connect the printer to your computer using your Wi-Fi network.

Wired LAN Connection
Connect the printer to your computer with an ethernet cable.

USB Connection
Connect the printer to your computer with a USB cable.

Step 10: Follow the on-screen instructions to complete the setup.

When the below screen appears, connection setup is complete.

Step 11: Click [Next] to continue installing the software.

Step 12: Select the software you want to install and click [Next].

Step 13: Follow the on-screen instructions to complete the software setup.

Now your computer is connected to the ij start canon  printer.

How can I wirelessly link my laptop to my Canon printer?

One USB cable end should be inserted into the USB port on the connection panel of the Canon printer. 3. Join the other end of the cable to the USB port on the side of your computer. Activate the printer. 4. From the Windows "Start" menu, choose "Control Panel".

How can I get the Canon IJ Scan tool?

You can get the Canon IJ Scan Utility installer programme from the official website. Save the file you just downloaded to your computer after that. Double-click the downloaded Canon IJ Scan Utility setup file next. Then, a smart screen can appear and ask for confirmation. To confirm, press "Yes." Last but not least, keep going through the installation instructions until you get a message confirming that it was a success.

How can I wirelessly connect a Canon printer?

Press the power button to turn the printer on. After that, choose Settings. When you've reached Device settings, push the arrow button again, and then press OK. Once you see LAN Settings, hit and hold the arrow button while pressing OK. When you arrive at the wireless LAN setup page, press OK after pressing the arrow button. The LED will flash and the printer will start looking for a WiFi network. After that, if the search process takes too long, press Stop, and the wireless LAN configuration will revert to its default setup. Select OK. Then, hold down the arrow button while searching for your WiFi network, and then press OK. Following that, enter the passcode and your WiFi password, then click OK. Entering pass:1 causes our keyboard to switch to a numeric mode. Finally, tap OK a second time after the screen says "Connected."

What can you do with the ij scan tool?

Easily Scan for Particular Purposes. Simply selecting an option, such as Auto for a rapid scan or Photo for a scan with photo-specific settings, will scan the area. automatic image saving of scanned objects. Photos that have been scanned are automatically saved in a designated folder.

For getting more information about it so you can visit my website here IJ.Start.Cannon