What if a vape mod displays “Ohms Too Low” after you press the action button? What does it mean? It means the device won’t work safely as the resistance of the atomizer coil in the tank is low.
However, the best vapes in Atlanta always come with built-in protection circuits. They manage the power delivery aspect to ensure a user can vape safely. One of the most crucial aspects of power management in a vape mod involves detecting the coil’s electrical resistance because it determines the voltage and amperage to be drawn from the battery to reach the selected wattage. If the resistance is too low, the resulting current may surpass the boundary of the battery’s safe operating limits. When that happens, the device shuts down and displays the message mentioned earlier.
“Ohms Too Low” error may also pop up if the device detects a short circuit. You won’t be able to vape until you resolve the situation, regardless of the problem. With this guide, you may be able to fix it yourself.
The device and coil resistance
You must ensure the vape mod supports the coil's resistance before you attempt to troubleshoot the “Ohms Too Low” error. Check the device’s specifications in the manufacturer’s manual. If you can’t find it there, search the internet. Sometimes, the resistance of a vape coil is etched into the side of the coil or printed on the box.
There are limitations to how low the resistance of a vape coil can be for safe wattage-based vaping. You may never see a commercially fabricated coil with a resistance below 0.1 ohm. Also, most vape mods in the market accept coils with this resistance value. To be precise, every modern vape mod can support any prebuilt coil available on the market.
Charge the battery
So, what can you do to fix the problem? You should start with the battery. If it has a low charge level, it may not be able to deliver enough voltage to the coil in the tank. In such a situation, the vape Atlanta mod may display “Check Battery,” “Low Battery,” or “Charge Battery.” Vape mods tend to exhibit strange behavior when the batteries are almost dead. Naturally, it may show the “Ohms Too Low” message too.
Look for leaks
If charging doesn’t do the trick, uninstall the tank and check the device’s threading. You should look for any contaminants, such as dirt, dust, or leaked vape juice. Vape mods can detect the resistance accurately only if there’s a good electrical connection between the coil and the device.
Clean the threading by inserting a swab of dry cotton and twisting it while pushing it down. Now, remove the swab. If it’s dirty or wet, repeat the process until a cotton swab comes out clean. Then, reinstall the tank and replace the screws firmly in place.
Other methods
What will you do if these two methods don’t yield results? You may try disassembling the tank and making sure the coil is tightened properly. The pins on the tank and the device may need to be adjusted too. If nothing works, you can be certain there is a potential problem in the vape Atlanta mod itself.
No comments yet