Amped Range Extender Not Connecting to Router [Easy Tips]

All your knowledge about how to setup Amped wireless extender seems wasted when your extender fails to connect to the router. In this very post, we have summed up a few troubleshooting tips using which you can fix the connectivity issue between your WiFi devices. So, let’s start with how to resolve the Amped extender not connecting to router issue.

Before Everything Else – Restart

If you want your range extender to connect to the router successfully, then consider restarting it first. The reason is, the extender needs an IP address from the router to get connected. If you restart your range extender, you provide it with an opportunity to rebuild the extender-router connection due to the re-assignment of the IP address. The steps to restart your extender are mentioned as follows:

• Power down your range extender.

• Unplug it and keep it in shade for some time.

• Replug the range extender.

• Switch it on.

Now check if the extender is still facing issues connecting to the main router. If it is, then consider walking through the tips highlighted in the upcoming section.

Fix: Amped Range Extender Not Connecting to Router

1. Check the Ethernet Cable

When it comes to connecting an Amped range extender to the main router, a lot of users prefer to go with a wired connection. But, they forget the fact the Ethernet cable won’t be of any good if the one used by them is damaged or is loosely connected to the ports of their devices which also lead them to Amped range extender login problems sometimes. Chances are that you also belong to their lot. Therefore, in an attempt to fix the Amped range extender not connecting to router issue, we suggest you replace the damaged Ethernet cable with a new one. Additionally, take care of the following things:

• The cable must be properly inserted into the correct ports of your devices.

• Your WiFi devices’ Ethernet ports are supposed to be in working condition.

2. Remove Signal Interference

WiFi signal interference might be another reason why you’re struggling with the Amped range extender not connecting to router issue. FYI, signal interference is nothing but an obstruction in the path of the WiFi signals emitted by your extender. This interference can be in physical form as well as in the form of waves. So, avoid keeping your extender under a table or inside a cabinet. Besides, do not place it in a corner or near a thick concrete wall. But, what about the interference waves that can’t be seen? Well, we’ve listed some of their sources below:

• Reflexive surfaces: Mirrors, glasses, lenses, metal objects, etc.

• Bluetooth gadgets: Speakers, watches, keyboards, etc.

• Heavy electrical appliances: Televisions, microwave ovens, refrigerators, etc.

• Objects carrying water: Fish tanks, geysers, dishwashers, etc.

Summing Up

As it is clear that the Amped range extender not connecting to router issue can arise due to improper extender start, damaged Ethernet cable or WiFi interference, we hope that you will take care of everything. However, we have one last Amped wireless extender troubleshooting tip for users who choose to connect their extender and router using a wireless source.

Always keep in mind that your devices need to share a visible distance if you want to connect them wirelessly. But, it never means that you can place them too close. It is because such an act will force their WiFi signals to get involved in a clash and you are likely to face major issues with the extender. Maintaining an optimal extender-router distance is an important factor while connecting the devices wirelessly.