What is Canon Printer Error E32?
Canon printer error E32 appears when your Canon printer cannot find a wireless router during setup. Several reasons prevent your printer from identifying wireless networks. If your printer displays error code E32, it is highly likely that all wireless hardware is turned off. Otherwise, it does not work properly. Sometimes when your Canon printer is out of network range, you encounter such an error code. Most of the time, it takes some time to configure and update the wireless network. However, it is also possible that the network you are trying to connect to is hidden.
What Causes Error E32 in Canon Printer?
Error codes can vary between different Canon printer models, and the information available may change over time. However, in general, Canon printer error code E32 can indicate a paper jam or a problem related to the paper feed mechanism. Here are a few possible causes of Error E32 in a Canon printer:
1. Paper Jam: A small piece of paper or other debris may be stuck inside the printer, obstructing the paper path. This can prevent the printer from properly feeding paper and result in Error E32.
2. Misaligned Paper: If the paper is not loaded correctly in the paper tray or the guides are not adjusted properly, it can cause the printer to encounter difficulties in feeding the paper, leading to an error.
3. Paper Sensor Issue: The printer's paper sensor, responsible for detecting the presence and movement of paper, may be malfunctioning. This can trigger the E32 error code as the printer fails to detect or feed the paper correctly.
4. Mechanical Problem: There could be a mechanical issue within the printer, such as a broken gear or a faulty paper feed mechanism, which is preventing the paper from advancing properly.
How to Fix Canon Printer Error E32?
To fix Canon printer Error E32, you can follow these troubleshooting steps:
1. Check for Paper Jams: Turn off the printer and unplug it from the power source. Open the printer's front cover or access panel and check for any visible paper jams or obstructions. Gently remove any stuck paper or debris. Make sure to clear the entire paper path.
2. Verify Paper Alignment: Ensure that the paper is properly loaded in the paper tray and the guides are adjusted correctly to align the paper. Improper paper alignment can cause feeding issues and trigger the E32 error. Make sure the paper is not bent, wrinkled, or overloaded in the tray.
3. Reset the Printer: Sometimes, a simple reset can resolve temporary errors. Turn off the printer, unplug it from the power source, and wait for a few minutes. Then, plug it back in and power it on.
4. Clean the Paper Feed Rollers: Over time, dust and debris can accumulate on the paper feed rollers, leading to paper feeding problems. Clean the rollers using a lint-free cloth lightly moistened with water or a mild cleaning solution recommended by Canon. Gently rotate the rollers to clean them thoroughly.
5. Check Paper Sensor: The printer's paper sensor may be malfunctioning or dirty, causing it to misread the paper's presence. Locate the paper sensor (refer to the user manual if needed) and ensure it is clean and functioning properly.
6. Update or Reinstall Printer Drivers: Outdated or corrupt printer drivers can also cause errors. Visit the Canon website and check for any available driver updates for your specific printer model. If necessary, uninstall the current printer drivers from your computer and reinstall the updated drivers.
7. Contact Canon Support: If the above steps do not resolve the error, it's recommended to reach out to Canon's customer support for further assistance. Provide them with the specific error code (E32) and details about your printer model for accurate troubleshooting guidance.
Source:
https://allprinters-customercare.com/canon-printer-error-e32/
+1-888-840-1555.
No comments yet