MSRM US300 Extender Setup

MSRM US300 extender offers maximum speed and full insurance across your home. Because of its compact size, it is easy to include into the décor of your house. allowing for 802.11b/g/n Wi-Fi connectivity and 300 Mbps of Internet speed. You may link your various devices to it like your monitor, PC, mobile phone, gaming console, tablet, etc. grasp MSRM US300 Extender Setup.

MSRM US300 Extender Setup using web browser:

Between your router and the location where you'll need internet connection, connect your extender.

• Now look in your Wi-Fi list on your phone or laptop for the MSRM network name. It's possible to use Wireless-N or Wireless-AC.
• Connect to the network; this might take up to 10 seconds, after which the MSRM might show you without any internet access.
• Open a new tab on the same computer and type AP in the address box.
• Using OR 192.168.10.1, complete the MSRM US300 extender setup.
• You can input your username and password there to access the admin login page.
• Go to the following step after selecting the repeater option from the list of choices.
• Pick the necessary Wi-Fi network name from the list that shows once the network has been searched.
• Enter your Wi-Fi password now; it should match the router's password.
• The MSRM network name can be changed or left alone in the next step.
• Your extender network will show up as your Wi-Fi Network SSID Ext after activation.
• You should attempt adding the PCs to the expanded network up until the extender reboots.

Note:- If you need any help regarding your MSRM US300 wifi extender so contact our technician or visit the official website that is MSRM US300 Setup.

How can i setup MSRM US300 extender via wps

• Before the setup is complete, you must connect in your new extender setup in the same room as your router.

• When you press the WPS button on the US300 repeater after the power light has been steady, you will notice a flashing light on it.

• Within two minutes, click the WPS button on your router. Connect to your router's wifi settings and turn on WPS there if the WPS button on your router is disabled.

• Now, you may see the WPS light flashing on both cameras for around ten to fifteen seconds.

• After a setup, WPS on a router will end and turn solid on the repeater.

• The network name (SSID EXT) for your extender is now visible in your Wi-Fi folder.

• Place the extender, which is disconnected, halfway between your router and the location where you require internet access. Keep it away from large equipment like air conditioners and microwaves.

MSRM US300 wifi extender firmware update

• Ensure that your extension is hooked and powered on by pressing "ON."
• Turn on Wi-Fi and look for and join the "MSRM us300" Wi-Fi network using your phone, laptop, or other mobile device.
• On the same computer, launch a new window, and then input "192.168.10.1" into the browser's address bar.
•  You will now be sent to a screen where you must provide a password and an administrator username. Enter your credentials.
• From the 'home page,' navigate to Administration Device Update. Under the Automatic Updates menu, select "Upgrade the firmware." To upgrade the firmware, if necessary, make sure your internet connection is consistent.
• The extender may need around 2 minutes to set up and reboot before being updated.