Installing new wood flooring in your home is an exciting and rewarding project if done by professional floor installation company in MT Vernon NY. It can transform the look and feel of your space and increase the value of your property. However, before the installation can take place, you need to take a few important steps to prepare your home. In this guide, we'll take you through the step-by-step process of preparing your home for wood floor installation, so you can ensure that the process runs smoothly and your new floors look their best.
Hire a Professional Floor Installation Company in MT Vernon NY
The first step in preparing your home for wood floor installation is to find a best floor installation company in MT Vernon NY. A reputable company will be able to provide you with expert advice on the best type of wood flooring for your home. Moreover they will provide a detailed estimate of the cost of the installation. They will also have the necessary tools and equipment to ensure that the installation is done correctly and efficiently.
Clear the Room
Before the installation can take place, you will need to clear the room of all furniture and other items. This will give the installation team the space they need to work. Further they will also protect your belongings from any damage that may occur during the installation process. If you have any large or heavy items that you cannot move on your own, be sure to let the Floor Installation Company know ahead of time so they can plan accordingly.
Remove the Old Flooring
If you have existing flooring in the room where you will be installing your new wood floors, you will need to remove it before installation. This will typically involve pulling up carpet, vinyl, or laminate flooring, and removing any adhesive or nails that are left behind. If you are unsure of how to do this or are concerned about damaging the subfloor, it's best to leave this task to the professionals at the Floor Installation Company.
Check the Subfloor
Once the old flooring has been removed, it's important to check the condition of the subfloor. The subfloor is the layer of material that sits beneath your flooring. It provides support and stability for your new wood floors. If the subfloor is damaged or uneven, it can cause your new floors to buckle or warp over time. A professional Floor Installation Company in MT Vernon NY will be able to check the subfloor. Further they make any necessary repairs or adjustments before installing your new floors.
Acclimate Your Wood Flooring
Before installing, it's important to acclimate your wood flooring to the room. This means allowing the flooring to adjust to the temperature and humidity of the room for at least 48 hours before installation. This will help to prevent your new floors from expanding or contracting after installation, which can cause gaps or buckling.
Clean the Room
Finally, it's important to clean the room thoroughly before the installation can take place. This will help to ensure that no dust or debris could interfere with the installation process. Be sure to sweep or vacuum the floor, wipe down any baseboards or molding, and remove any debris or trash from the room.
How to Install a Wood Floor Step by Step?
Once you prepare the subfloor, you can begin installing the wood floor. Here are the steps you need to follow:
a) Acclimate the wood: Allow the wood to acclimate to the room for at least 72 hours before installation. This will prevent the boards from expanding or contracting after installation.
b) Install the vapor barrier: Install a vapor barrier over the subfloor to prevent moisture from seeping into the wood.
c) Lay the boards: Start by laying the boards along the longest wall in the room. Use a pneumatic flooring nailer to secure the boards to the subfloor. Use spacers to create an expansion gap around the perimeter of the room.
How to Finish a Wood Floor
After the boards are installed, you'll need to finish the wood floor to protect it from wear and tear. Here are the steps you need to follow:
a) Sand the floor: Use a drum sander to sand the floor, starting with a coarse grit and working your way up to a finer grit. Sand the edges of the room with an edging sander.
b) Stain the floor: Apply the stain with a brush or roller, following the grain of the wood. Wipe off any excess stain with a clean cloth.
c) Apply the finish: Apply a clear finish to the floor using a brush or roller. Follow the manufacturer's instructions for drying time and number of coats.
Conclusion
Preparing your home for wood floor installation may seem like a daunting task, but with the help of a professional Floor Installation Company in MT Vernon NY, it can be a simple and stress-free process. By following these step-by-step guidelines, you can ensure that your new floors look their best and provide you with years of beauty and durability. So if you're considering installing new wood flooring in your home, be sure to find the Best Floor Installation Company in MT Vernon NY and start preparing your home today!
No comments yet