What is the setup process for a Dodocool wifi extender setup?

A wifi network extender is called Dodocool Wifi extender setup.Does it explain what a wifi network extender is and why we require one? When our house or office's wifi range is limited, a wi-fi extender can assist us use our electronic devices. There are situations when a home router's coverage is insufficient to provide a reliable and strong internet connection throughout the house. Therefore, tools like the very helpful Dodocool DC39 wall-mounted wireless range extender are great for easing this. It can penetrate even the most remote areas of houses. It can function up to a distance of 100 metres and has a 300 Mbps transmission rate via a 2.4 GHz network via wireless N (802.11n). Improved wifi performance and stability are guaranteed by two integrated antennas. There are several methods for setting up a Dodocool DC39 extender.

How can I set up a Dodocool extender manually?

• Plug your Dodocool extender into a power outlet and turn it on
• On your Wi-Fi-enabled device (laptop, smartphone, or tablet), go to the Wi-Fi settings.
• Look for the Wi-Fi network broadcasted by your Dodocool extender (it usually has a name like "Dodocool_Extender").
• Connect to this Wi-Fi network using the provided default password.
• Open a web browser on your connected device.
• In the address bar of the web browser, enter the default IP address for Dodocool extenders ap.setup or 192.168.10.1 and press Enter.
• You will be prompted to enter a username and password. Refer to the user manual for the default credentials, typically "admin" for both.
• Follow the on-screen instructions to configure your Dodocool extender. This usually involves selecting your existing Wi-Fi network and entering its password.
• After entering the required information, apply the settings and wait for the extender to restart.
• Once the extender has restarted, reconnect your devices to the extended Wi-Fi network.

NOTE : If you need any help regarding your wavelink wifi range extender so get in touch with the technician or visit the official web site that is wavlink ac1200 wifi setup.

How do I connect Dodocool extender setup” via WPS setup?

1. The extender must be plugged into an electrical socket.
2. The Dodocool DC39 extender setup is ready to start when the green light blinks, indicating that it is in the same room as your router.
3. Verify that the switch on your DC39 extender is set to the correct mode (router, signal repeater, or range extender).
4. Press the WPS button on your router now, and on the extender two minutes later. The WPS button on the dodocool extender is situated on its side.
5. Both the router and the extender's WPS light will be blinking. Likewise, the DC39's Wi-Fi light will turn solid after setup.
6. You can now connect your devices to the wi-fi-deficient location by moving this extender there.

Login method for Dodocool wifi extender setup ?

• Connect a Wi-Fi capable device (such a laptop or smartphone) to the Wi-Fi network that your Dodocool extender is broadcasting. Usually, the network name (SSID) is "Dodocool_Extender."

• On the connected device, open a web browser.

• Enter the Dodocool extenders' default IP address in the browser's address box. This may be 192.168.0.1 or 192.168.1.1. Hit the Enter key.

• It will ask for your username and password. For the default password, consult the user manual that came with your Dodocool extender. Usually, a username and password are "admin".
• You are able to see your Dodocool extender's setup settings after signing in.

How do firmware updates in Dodocool wifi setup? 

1. Connect to your Dodocool extender's network using a device such as a computer or smartphone.
2. Open a web browser and enter the default IP address of your Dodocool extender in the address bar. Common default IP addresses include 192.168.0.1 or 192.168.1.1.
3. Log in with your administrator credentials. Refer to the user manual for the default username and password.
4. Navigate through the admin panel to find the section related to firmware or system updates. This may be labelled "Firmware Update," "System Maintenance," or something similar.
5. Within the firmware update section, there should be an option to check for the latest firmware updates. Click on it to see if there's a newer version available.
6. If a new firmware version is available, download it from the Dodocool website or the official source recommended in the admin panel.
7. In the firmware update section of the admin panel, there should be an option to upload or install the downloaded firmware file.
8. Begin the firmware update process by following the on-screen instructions. This may involve confirming your intention to update and waiting for the process to complete.
9. Once the firmware update is complete, the extender will likely restart automatically. Be patient and allow the device to finish the restart process.
10. After the restart, log back into the admin panel and check the firmware version to ensure it has been successfully updated.

How do I reset my Dodocool extender?

• Find the reset button on your Dodocool WiFi extender. This button is typically a small, recessed button that may require a paperclip or similar tool to press.
• Ensure that your Dodocool extender is powered on
• Use a paperclip or similar tool to press and hold the reset button for about 10-15 seconds. Keep holding it until you see the lights on the extender flash, indicatingAllow the Dodocool extender a few moments to reset. This process may take a minute or two.
• After the reset is complete, you may need to power cycle the extender by turning it off and then back on
• Connect to the default WiFi network broadcasted by your Dodocool extender (usually named "Dodocool_Extender").
• Access the extender's configuration page using a web browser and the default IP address (commonly 192.168.0.1 or 192.168.1.1).
• Log in with the default username and password (refer to the user manual for these credentials).
• Follow the setup wizard or configuration steps to set up your Dodocool WiFi extender again.
• After the reset, it's advisable to change the default login credentials and WiFi passwords for security reasons.