ap extender setup

The Help of your browser, Ap.setup enables you to log into your wifi-range extender. Before we start the ap.setup login, make sure that your WiFi router is working after unboxing your device. If you have trouble seeing this URL, input 192.168.10.1 to the address bar to view the setup page. Now let's begin the setup.

AP setup via a browser

• You may plug in your extension nearer to the network whether it's five or ten feet away or even in the same room.
• Now connect your phone and your computer to the wifi network extender.
• It reads "Wireless-N" for 2.4GHz & "Wireless-AC" for 5GHz.
• Go to your WiFi list and make a link with one of these networks it appears.
• The moment the browser opens after connecting, the app setup wizard starts automatically.
• If the setup wizard is missing, open a browser and enter http://ap.setup or 192.168.10.1 in the address bar at the very top of the page. It needs

NOTE : If you need any help regarding your wavelink wifi range extender so get in touch with the technician or visit the official web site that is wavlink wifi setup.

Ap setup via WPS

• It helps to locate the cable in the same room as the router for this setup; or it might not connect to the router in any way or take longer than expected to set up.
• There should be a light that blinks on the repeater once you locate the WPS button and push and keep it for about two seconds.
• If the WPS function on your router isn't enabled, press any of the available WPS keys to log in. Go to the wireless settings, click WPS, and then turn up WPS.
• The router's or the extender's WPS lights will blink for 10 to 15 seconds.
• After configuration success, the WPS lights

Login process for ap extender setup

1. Set on the Wi-Fi extender and be sure it is placed so it can pick up a signal from the Wi-Fi network you already have.
2. Click on the Wi-Fi options on your laptop, smartphone, or tablet and connect the network that bears the name of your extender. Its network name is often your current Wi-Fi network name with "_EXT" or a similar prefix
3. Once your device is linked to the extender's system, open a web browser (like Chrome, Firefox, or Safari).
4. Put the extender's default IP address in the address bar of your web browser. A few instances of common addresses are "192.168.1.1" and "192.168.0.1." This information is located on a label on the extension or in the user manual.

Firmware update on ap extender setup

• Verify the settings menu of the extension for a "Firmware Update," "Software Change," or similar option.
• Select whether you want to install or upload the firmware.
• Select the firmware file that you got from the official manufacturer's web.
• After the update starts, watch for its finish. This may require a reboot of the extender.

How do I reset an ap extender setup?

• Find the reset button on your AP extender. It is typically a small button that may be recessed and require a paperclip or similar tool to press
• .Ensure the AP extender is powered on. If it's not already plugged in, connect it to a power source
• Press and Hold Reset Button:Use a paperclip or a similar tool to press and hold the reset button on the extender.
•  Hold it down for about 10-15 seconds.Release the reset button and wait for the extender to reset.
• This process may take a minute or two. Once reset, the extender will return to its factory default settings.