Braided Shower Head Saves Water, So You Don’t Have To

One of the most effective ways to save water is to install a water saving showerhead. This article provides easy-to-follow instructions on how to change your current shower head so that you can conserve more water.

Introduction

If you're like many homeowners, you dread having to take long showers. You might think that it's not really worth the water savings to take a shorter shower, but you'd be wrong. Braided shower heads save up to 50% more water than standard shower heads. So not only are you saving yourself time, but you're also saving yourself money on your water bill. duschkopf wasser sparen test

Why we waste water in the shower

We often take long, luxurious showers, only to end up wasting water. Turns out, many of our wasteful habits are rooted in the way we shower. Here are three reasons why braided shower heads save water:

1. They Use Less Water Than A Traditional Shower Head

A traditional shower head uses 3-5 gallons of water per minute, while a braided showerhead uses about 2 gallons per minute. That’s a savings of about 20-30 gallons per hour!

2. They Save You Time and Energy

A traditional shower head can take 10 minutes to fill up from a spigot, while a braided shower head requires just 2 minutes of filling time. This means you can shave minutes off your time in the shower each day!

3. They Protect Your Shower Floor and Walls from Damage

A traditional shower head can cause damage to your floor and walls due to its high pressure and flow rate. A braided shower head does not have these same risks and can even be used on low-pressure systems. This means you don’t have to worry about damaging your bathroom floor or walls duschkopf wasser sparen test

The benefits of a braided shower head

Braided shower heads save water. Braided shower heads use less water than a traditional shower head. You will not have to worry about running out of water when taking a shower with a braided shower head. Additionally, braided shower heads are more durable than traditional shower heads. They will last longer and resist clogs.

How to install a braided shower head:

1. Unscrew the shower head’s stem cap.
2. Remove the old shower head by pulling it straight off the pipe.
3. Clean the shower head threads and replace the new lever with the included allen wrench. Tighten with a ratcheting motion until it’s snug, but not too tight.
4. Reattach the stem cap and screw it in place with the included screwdriver.
5. Wrap the braided tubing around the stem once, then do it again opposite of how you did it in step 2 (clockwise for left-handed people). Tighten both wraps evenly with your hand, then use pliers to secure them together at both ends.
6. Slide the entire assembly back onto the pipe, making sure that the tubing is positioned correctly and that it doesn’t touch any other parts of the shower head or pipe. If needed, trim any excess tubing with a knife or scissors before replacing the shower head’s sealant cap.

Conclusion

A braided shower head saves water, so you don’t have to. It doesn’t lose pressure like a standard shower head and it won’t cause your tub to become clogged up with hair. Plus, it looks great!