Being a top-performing device never means that a Linksys WiFi range extender can’t fall victim to issues. We’ve come across various Linksys users who have complained that their range extenders stopped working. With that being said, we decided to pen down an article to help users who are facing the same issue. In case you’ve also performed the Linksys WiFi extender setup and your device is not working up to the mark or has completely stopped working, you can take the help of this very write-up. Keep reading.
Why Linksys Extender Stopped Working?
Let’s start the troubleshooting process by attempting to find out the root cause behind the issue. If you don’t go very deep in, you can simply blame an improper power supply for the non-working status of the range extender. But, there are other possibilities too. Thus, apart from fixing power-related issue, we will also shed light on other reasons due to which your extender might not be working.
First of all, let us address power-related issues. Since the form-factor of Linksys range extenders is plug-and-play, it can be concluded that there is no issue related to the power cord because it is not there. Thus, the power socket might be at the fault. You can check its physical status to know whether it is in the condition of supplying fluctuation-free electricity to the Linksys extender or not. If something is fishy, change the socket. If everything is fine, simply walk through these points to learn what might be spoiling your internet-usage experience with the Linksys device.
- Your extender isn’t connected to the main gateway/router properly.
- The firmware version on which your extender is working is outdated.
- Your extender has overworked and hence fallen a victim to technical glitches.
Solutions: Linksys Extender Stopped Working
In the previous section we tried to sum up the reasons due to which a Linksys range extender denies working. This section will particularly focus on the solutions that can take you out of this mudhole. This is to inform you that the hacks mentioned below will apply equally irrespective of the fact that you have performed Linksys RE6350 WiFi extender setup or have installed another extender model.
Connect the Extender and Router Properly:
Pay attention to the extender and router connection. If you have connected them through an Ethernet cable and it is found damaged, replace the cable and reconnect your devices. Just in case you have chosen a wireless source to connect your WiFi hardware, you are suggested to keep them at a safe distance. Keeping them closer is an invitation to technical problems because of a clash of their signals.
Update the Firmware:
Now, consider logging in to your range extender and uploading the latest firmware version as per its model number. It has already been mentioned that an outdated firmware version can create problems. Keep in mind to upload the firmware file that corresponds to the model number of your Linksys extender. This is because uploading incorrect file reduces the chances of reviving your range extender.
Restart the Range Extender:
Overworking of the extender can result in technical glitches. You can get rid of these glitches by powering down the extender and letting it rest for 10-15 minutes. Ensure that your extender stays disconnected from the router during this period. After the decided time, connect the router and extender once again and switch on your Linksys range extender.
To Sum Up
That’s all you can do to fix the Linksys extender stopped working issue. It is anticipated that after walking through the techniques provided by us, you will be able to get rid of the problem. Now, all you have to do is resume your internet experience. On the off-chance, the problem is still there, then you have to take the crucial step of resetting the extender and setting it up once again before resuming the internet experience.
No comments yet