Netgear EX6110 Setup | Netgear Ac1200 Setup

5 min read

Would you like to have access to up to 1200Mbps of dual-band WiFi in every room of your house? Use the Netgear EX6110 AC1200 extender setup, which has strong receivers to increase the wireless range of your current networking device. The FastLane Technology of the EX6110 wireless range extender makes it possible for users to play online games and stream HD videos without interruption. But to do all of this, you need to set up the Netgear EX6110. If you are a beginner and require guidance on how to set up the WiFi range extender EX6110, all the information you require is available on this page. 

The Netgear EX6110 Extender Setup Instructions

We would like to inform you of the steps involved in setting up the Netgear EX6110 without requiring much of your time. The following techniques are available to aid with the setup process:

  1. Nighthawk application
  2. Via Web GUI
  3. WPS method

Proceed to the next parts to gather knowledge on setting up a Netgear extender using these three approaches. But, we would like to let you know that if you run into any difficulties along the way, you can get personal help from our technical support staff.

Netgear EX6110 Setup | Nighthawk App

Everyone seems to be using a smartphone these days, as they are common. Using the Netgear EX6110 extender requires using the Nighthawk program during the setup phase. Thus, to install an EX6110 range extender using the Nighthawk mobile app, follow the methods shown below:

  • The first thing you need to do is take your Netgear device out of the box and plug it in.
  • Your EX6110 device can be turned on by pressing the Power button.
  • Connect the extender and router now. You have two options for sources: wireless and Ethernet.
  • When you unlock your phone, make sure it's fully charged.
  • Depending on the operating system on your phone, download the Nighthawk app from the app store.
  • When the app is installed on your phone, launch it right away.
  • What you have to do next is create a Netgear account.
  • To do the same, you'll need your email address and password.
  • On the following screen, enter your EX6110 range extender's login information.
  • Pressing the Login button will provide the steps required to continue.
  • After completing them, install your Netgear WiFi device completely.

As soon as you attempt the final instruction shown on the range extender's dashboard, the setup procedure will come to an end. Following that, you can use your devices to access the Netgear setup.

Netgear EX6110 Setup | Web GUI

The web graphical user interface is an option for those who like to configure their WiFi range extenders on a large screen. A laptop and computer are needed for this procedure. To install your Netgear EX6110 extender on a computer or laptop using the mywifiext setup wizard, follow these instructions:

  • As stated in the following technique, make the necessary arrangements. The EX6110 extender needs to be powered on and connected to the main router.
  • Next, turn on your computer and open a web browser.
  • Use the address bar to go to
  • The administrative page, also known as the Netgear extender login window, will shortly come into your view.
  • Enter the login and default password in the designated areas.
  • You will be redirected to the BASIC Home screen, often known as the Netgear Genie setup procedure, after clicking Log In.
  • Follow the on-screen instructions to finish the setup procedure.

The online GUI has finished the Netgear AC1200 setup. You can now enjoy the freshly extended network by logging out of your extender. But know that you always have the option to ask for assistance from our technical support staff if you are unable to finish installing the extender.

Netgear EX6110 Setup | WPS Method

Using a laptop or mobile device is not required while installing the Netgear EX6110 extender via the WPS technique. You must, however, confirm that the host router is compatible with the WPS setup. Find how to install EX6110 using the WPS method by following the instructions listed below.

  • Your Netgear device should be plugged into a power outlet close to the main router.
  • After making sure the plugs on each of your WiFi devices are functioning, turn them on.
  • Do your devices' LED lights stay solid? If so, proceed to the next section.
  • Locate and press the "WPS" button on your EX6110.
  • Use your host's WiFi router in the same way.
  • The setup procedure has finished.

This completes the WPS configuration for the Netgear EX6110 extender. However, be aware that if your WiFi devices are sharing enough distance, you will be able to successfully complete the setup process. This means that the devices shouldn't be placed too close or too far apart.

In case you have found a mistake in the text, please send a message to the author by selecting the mistake and pressing Ctrl-Enter.
Comments (0)

    No comments yet

You must be logged in to comment.

Sign In / Sign Up