If you’re experiencing dead zones or weak signals in certain areas of your home or office, the Netgear AC1200 WiFi range extender can be the solution to boost your wireless coverage. In this guide, we will walk you through the process of setting up Netgear AC1200 WiFi range extender using three different methods. Need assistance with your Netgear extender setup? Call +1(855)201–8071 or chat with our dedicated support team for prompt and expert assistance.

Method 1: WPS (WiFi Protected Setup)

Step 1: Locate the WPS Button

Firstly, locate the WPS button on both your Netgear AC1200 WiFi range extender and your router. The WPS button is usually marked and can be found on the front or side of the devices.

Step 2: Press the WPS Button on the Extender

Press the WPS button on your Netgear AC1200 WiFi range extender. Wait for the WPS LED to blink, indicating that the extender is trying to establish a connection with your router.

Step 3: Press the WPS Button on Your Router

Within 2 minutes of pressing the WPS button on the extender, press the WPS button on your router. The WPS LED on both devices should turn solid, indicating a successful connection.

Step 4: Verify Connection

Wait for the Netgear AC1200 WiFi range extender to connect to your router. Once the connection is established, relocate the extender to a central location for optimal coverage.

Method 2: Web Browser Setup

Step 1: Connect to the Extender

Using a WiFi-enabled device, connect to the default WiFi network of the Netgear AC1200 WiFi range extender. You can find the default network name (SSID) and password on the extender’s label.

Step 2: Open a Web Browser

Open a web browser on your connected device and enter “mywifiext.net” in the address bar. This will take you to the Netgear Genie setup page.

Step 3: Create an Account or Log In

Follow the on-screen instructions to either create a new account or log in if you already have one.

Step 4: Complete the Setup Wizard

The Netgear Genie setup wizard will guide you through the process. Follow the instructions to configure your extender settings and connect it to your existing WiFi network.

Method 3: Ethernet Connection Setup

Step 1: Physical Connection

Connect one end of an Ethernet cable to the Ethernet port on your Netgear AC1200 WiFi range extender and the other end to a computer.

Step 2: Power On

Power on the extender and wait for the LED lights to stabilize.

Step 3: Web Browser Access

Open a web browser on your computer and enter “mywifiext.net” in the address bar.

Step 4: Follow the On-Screen Instructions

Once you access the setup page, follow the on-screen instructions to configure the extender settings and establish a connection with your router.

Conclusion

With these three methods, you can easily set up Netgear AC1200 WiFi range extender and enjoy extended wireless coverage throughout your home or office. Whether you prefer the convenience of WPS, the user-friendly web browser setup, or a direct Ethernet connection, Netgear provides flexibility to suit your preferences. Stay connected seamlessly with the Netgear AC1200 WiFi range extender!