It's common knowledge that restarting your Wavlink extender will fix any connection troubles you may have. But what if your Wavlink WiFi range extender keeps restarting itself? Well, it certainly causes alarm, since that might create significant problems with your WiFi gadget.
Learn how to stop your Wavlink extender from restarting unexpectedly by following the steps outlined in this article.
Fix: Wavlink Extender Random Reboots
-
Update the Wavlink Firmware
To my knowledge, there isn't a single technical expert who disagrees with this. Your Wavlink WiFi range extender's security and performance might both benefit from a firmware update via http//ap.setup. In addition, it will prevent your device from restarting itself. So, it's important to regularly update your device's firmware.
http//ap.setup may be accessed after a successful Wavlink extender login; from there, the Settings page can be accessed, and from there, the Firmware Update option can be found in the Administration menu.
-
Don’t Let Your Device Overheat
Your Wavlink extender may be overheated, which causes it to reboot often. It's possible that after a full day of use, your gadget will just wear itself out. It may overheat in this situation and malfunction.
Thus, avoid putting your extender in a hot spot. Also, every once in a while, try to avoid using your gadget for at least ten or fifteen minutes.
-
Verify the Power Inputs
Keep an eye on the power supply of your Wavlink extender regularly. Because if you use the wrong power source, you may have problems with your device, such as it restarting too often or not allowing you to log in to wifi wavlink com.
Verify that the cord plugging your gadget into the wall is in excellent shape. Check for flickering; the LED lights should be steady on. Also, double-check the Ethernet cable that links your extender to your router. Make sure that's sturdy enough.
-
Take Advantage Of a USB Cooling Fan
Another option for eliminating the random rebooting of your device is to purchase a USB fan. One of the cheapest methods to prevent technical problems.
Simply connecting the USB fan to the extender's USB port is all that's required for it to work. All the heated air will be sucked out in a matter of seconds, saving your gadget from overheating and restarting.
-
Maintain the Cleanliness of Your Device
Your Wavlink WiFi range extender is very vulnerable to dirt. How? Well, grime may make its way in via the crevices and wreak havoc on the workings within. Therefore, it is highly advised that you always maintain your gadget clean and tidy.
Don't use any water or chemicals if you want to clean it up every day. Dust may be removed using a damp cloth or a brush.
-
Try Resetting Your Wavlink Extender
Finally, resetting the device to its factory settings might help you get rid of the rebooting problem. Relax! It's hardly rocket science to reset your gadget. If you follow the instructions below, your extender will be back to its original settings in no time.
-
Activate your wireless gadget by pressing its power button.
-
You may either use a wireless connection or a cable to link the extender to the router.
-
Find the extender's Reset button and press it.
-
Once the button is located, push it gently.
-
A sharp pin like an oil pin or a paper clip will work to push the button.
-
Now, please wait a few seconds for your device to reboot and return to factory settings.
-
Take note that the default web address for your Wavlink WiFi range extender is wifi.wavlink.com.
Conclusion
The next step is to attempt doing the Wavlink WiFi extender setup, which can be done with the help of the extender’s handbook. Is the WiFi repeater you're using still restarting? Please use the comment area below to offer your response.
No comments yet