Nowadays, we expect to be able to connect to the internet wirelessly from anywhere, using whatever device we want. WiFi can be used at both the 2.4GHz and 5GHz ranges, although few are aware of this fact. The bands have their advantages and disadvantages, but we need both to get the best possible internet connection in and around our home or office. When will a Wavlink extender 2.4GHz connection not work, but a 5GHz one will? We're here today to figure out what's wrong and how to fix it.
What’s the Difference Between 5GHz and 2.4GHz?
Coverage and speed are the primary distinguishing features. Despite being somewhat slow, the lower frequency of 2.4GHz may readily pass through obstacles, enabling it to cover more land. Since signals at 5 GHz and above have a harder time penetrating solid objects, their effective range is limited. The converse is true for signals traveling at higher frequencies, which may be sent and received at a much quicker rate.
Devices nowadays often auto-detect the best band available, so you can focus on getting the most out of your internet connection without worrying about which Wavlink WiFi band your device is using.
Fixed: Wavlink 5GHz Working But 2.4GHz Not
-
Reboot the Wavlink Extender
Many times when there is an issue with a network, rebooting the Wavlink extender can fix it temporarily. It can be restarted in a number of different ways, depending on the Wavlink model, but the tried-and-true approach of just turning it off and on again should work just fine for the vast majority of devices.
The most important thing to keep in mind is to take things carefully and give the extender plenty of time to completely power down and restart. If the 2.4GHz WiFi problem is fixed, the connection will increase greatly.
-
Change the WiFi Mode
Because of the WiFi mode, 2.4 GHz WiFi may not be detected. To operate and connect to a network, various gadgets have varying operational requirements. The majority of your electronic gadgets, including your phone, computer, and tablet, should continue to operate properly; however, you may need to switch the wireless mode on a few.
To change the extender's wireless settings, go to the Wavlink WiFi extender login page. There ought to be a few options, so try a couple out and see what happens.
-
Switch WiFi Channel
While the 2.4GHz band is the most popular for long-range transmissions, it only has 11 accessible channels. However, the 5GHz band's increased channel capacity and faster connection speeds come at the expense of poor reception in bigger buildings and residences.
For this reason, familiarity with channels and congestion is crucial, as it will help you save a great deal of trouble in the long run. If you want to be sure you're using the best possible internet connection and the least popular channel for your 2.4GHz device, you should do it manually or with the use of third-party software. If the device is unable to reconnect to the network, try switching to a different channel.
-
Replace Old Firmware With New Versions
It's possible that the outdated Wavlink firmware is to blame if the band and WiFi were operating OK before 2.4 GHz suddenly ceased functioning. The extender's firmware may be out of date or the most recent upgrade may have caused complications.
In most cases, the updates may be downloaded directly from the Wavlink official website. However, there are usually a few kinks in the new firmware that will be worked out in time. If the outdated firmware was the root cause of the issue, it should be resolved soon.
Final Words
It’s important to resolve the Wavlink extender 2.4GHz WiFi not working issue. It is because it can also halt you from doing Wavlink login. Hopefully, this article will help you get the problem resolved.
Read more: Uncut Guide to Resolve Wifi.wavlink.com Not Working Issue
No comments yet