90% of people who urge to access a superfast internet connection across every part of their house prefer doing wifi.wavlink.com setup. If the power LED on your Wavlink WiFi router doesn't flash green and stays lit after being turned on, try resetting the device. If you answered "yes" to this question, then you have a hardware problem. If you're having this problem, follow the procedures outlined in this article to see if you can get it fixed. The finest do-it-yourself solutions to the red light problem are discussed in this article. So, without further ado, keep reading down below.
Fix: Power LED Blinking on Wavlink Router
-
If the device is not getting power, check the adapter.
The power adapter of your Wavlink WiFi router should be checked first. If you want your router to work properly, you must use the power adapter it comes with. It's possible that your device won't work with a local adapter.
Check the condition of the power cable that links your router and power supply. In the odd event that it isn't, you should alter it right away. There shouldn't be any damage to your power cord.
-
Join the Modem to the Router
Also, you may try checking the link between your router and modem to see if that's causing the red light problem. Do all of your electronic gadgets have a reliable connection? No? OK, I bet it's because everything is linked wirelessly.
Using an Ethernet connection to link your WiFi gadgets might help you diagnose the problem. The only thing you need to watch out for is a sloppy connection between the cables. You should be able to finger-tighten all of the connections between the cables.
-
Restarting your Wavlink router may help.
It is possible that restarting the device will fix the technical problem. You should give it a go, right? If you're game, these are the rules you'll want to stick to:
-
Remove any unnecessary gadgets from your Wavlink router.
-
Remove the power cord from the wall outlet and power off the router.
-
Wait a moment as your WiFi router reboots.
-
Finally, reconnect your router to the wall socket by plugging in the power cord.
-
In the end, you'll need to turn on your WiFi gadget.
When you're done, make sure the power LED problem is resolved. If not, then you need to upgrade the firmware on your Wavlink router by logging into it via the Wavlink router password.
-
Router firmware updates are essential.
If you want your WiFi gadget to function correctly, you need to update its firmware. As such, it is important to regularly upgrade the router's firmware.
To upgrade your router, please follow the steps outlined below:
-
Start up your Wavlink router by turning the power on.
-
If the LED indicator is not green, you should not go further.
-
Get an Ethernet wire and hook up the modem to the router.
-
Launch your preferred web browser on the laptop.
-
Go to the Wavlink router login page.
-
Fill up the blanks with the device's default administrative username and password.
-
The Settings menu may be accessed after a successful login.
-
To check for firmware updates, choose the corresponding menu item and follow on-screen instructions.
Following the aforementioned instructions in the letter will guarantee that your device's firmware is updated. To see whether the power LED light issue has been resolved after upgrading the firmware of your device, try turning it on and off. If that isn't the case, possibly your router is improper setup. So, set it up properly.
Takeaway
By following these tips, the blinking power LED of your Wavlink router won’t trouble you anymore. However, if you want to enhance your router’s range, we advise getting a WiFi range extender from Wavlink, linking it to the existing access point, and configuring it by accessing the Wavlink WiFi extender login page.
No comments yet