Problems with your Wavlink WiFi extender connecting to your router? Not at all! This problem can be fixed, just like any other technical problem. Follow the steps outlined in the article to figure out what's wrong and how to fix it. But before diving into the specifics of how to fix the problem, it's important to understand what caused it. If you follow these steps, you'll be able to solve the problem more effectively. Here's more reading material.
Reasons: Wavlink Extender Not Connecting to Router
Your Wavlink WiFi extender is not ready to work with your current router for the reasons listed below:
-
Damaged hardware
-
Wired connection problems
-
The extender and router aren't properly synced
-
Your extender has out-of-date software
-
WiFi signal disruption
You should be able to solve the problem more quickly if you are aware of these causes. However, you need to understand that the below-listed hacks will be of no avail if you haven’t performed Wavlink WiFi extender setup properly. Thus, have a tab on the same first. If you feel like everything is fine with the gadget’s installation, you may proceed to troubleshoot the problem.
Fixed: Wavlink Extender Not Connecting to Router
-
Check the Hardware
Your Wavlink extender's hardware should be checked first. How well did you set up the antennas? Is the power outlet you're using to charge your gadget functioning properly? Is the wire that supplies electricity to your extender and power supply failing you? Verify that these details are being attended to properly.
-
Look at the Extender-Router Connection
If your extender still won't connect to your router, check the power supply you're using to link the two WiFi devices. Have you been making all of your connections wirelessly up until now? If you said "yes," you have your answer and can figure out what you did wrong.
In order to fix this, check to see whether an Ethernet cable is connecting your Wavlink extender directly to the router. Make sure the Ethernet wire you're using hasn't been damaged in any way. There shouldn't be any nicks or cracks in it.
-
Perform Wavlink Firmware Update
Perhaps the router is really connected via your network. However, your old extender is likely to blame for your difficulties in fixing them. Did you not aware that using old firmware might lead to a slew of problems? Fortunately, you do now.
Before making any assumptions, check the Wavlink extender login page to see whether there is updated firmware available for your Wavlink WiFi extender. You may upgrade your device's firmware by following the steps outlined below:
-
Turn on the wireless extender from Wavlink.
-
Get your laptop set up and load the web browser of your choice.
-
Then, access your wireless extender’s web page by using your Wavlink extender's default username and password at wifi.wavlink.com.
-
In order to upgrade the device's firmware, choose Setup > Upgrade Firmware.
What the heck happened? Did you waste your time updating the firmware on your device? It seems like there's just one option left to solve the problem. That's the end, and you've been reset to factory settings.
-
Reset Your Wavlink Extender
Here are the detailed instructions you'll need to follow to reset your Wavlink WiFi extender to its original configuration:
-
In order to do this, please start a new tab in your browser.
-
Log in to your Wavlink WiFi extender.
-
To return to the manufacturer's defaults, choose Settings > Setup > Erase.
-
Now, please allow some time for your gadget to reset to factory settings.
Conclusion
Following resetting the Wavlink WiFi repeater to its factory settings, try rejoining it with the router. However, you are supposed to perform Wavlink setup before that. The extender’s handbook will be able to offer some help with that. So, what did the judge rule? Express your views into the comment section.
No comments yet