It is becoming more affordable and accessible to buy WiFi range extenders. Galaway is the leading name in the wifi extender industry because they easily remove all the dead zones in their area. It is also imperative to place your Galaway wifi extender in the best location so it quickly provides the wifi network to every corner of your area. It is also vital to complete the Galaway wifi extender setup properly because it makes it easier for you to use them.
How Do I Connect my Galaway WiFi Extender?
The most important part of the Galaway wifi extender setup is the location of the extender. This is very important because it allows you to optimize your network's performance and broadcast your wireless signal throughout a wide area. Here is where the router and Galaway wifi range extender are placed.
Your house and office may have several rooms, so you may have to be creative in finding the best location. However, priority is always given to the most critical areas where wireless signals are more likely to be required.
When attempting to correct wifi dead zones with an extender, you can start by mapping all those areas. It may be necessary to move around the house or office with your mobile phone to test the signal. You can always ask yourself a simple question after this step.
Method of Galaway Wifi Extender Setup
There are basic three methods for Galaway wifi extender setup. It is also crucial for users to follow all steps accordingly so they can quickly complete the setup of the Galaway extender. You can use the
- WPS Method
- Ethernet Cable Installation
- Wireless Setup
Galaway Wifi Extender Setup with WPS
WiFi-protected setup is commonly referred to as WPS. Your router must have a WPS button to be compatible with the Galaway wifi extender setup. Most routers and extenders come with a WPS button, so they are easier to set up. This button comes with a yin and yang design, with arrows pointing in different directions. When you want to start the WPS setup, it is also vital to check whether your router has a WPS button or not.
You can use this method when your router and extender both have a WPS button. It is an easier process of Galaway wifi extender setup than other methods. This process is without any password or cable. The solid green color light appears when the Galaway extender set a connection with the router. There is a need to follow these steps to start the Galaway wifi extender setup.
- It is necessary to make sure that you properly plug your Galaway extender into a working AC outlet. It helps in avoiding any network signal interruption.
- There is a need to check the WPS button on your router and extender.
- Press and hold the WPS button on the router for a few seconds.
- When the 40 seconds is up, take the Galaway WiFi Extender and wait another 30 seconds until you have successfully connected it to your WiFi router.
- Allow a few moments for the extender light to turn on, and take a look at your WiFi router for the SSID of your Galaway extender.
- It is also necessary to check your wifi connection when it attaches to your Galaway wifi extender by using the service set identifier.
After using the above steps for the Galaway wifi extender setup, you can quickly use your Galaway wifi extender.
Galaway WIFI Extender Setup By Using Your PC
You can also use your PC for Galaway's wifi extender setup. It has one LAN and one WLAN port for use as an access point or router. It also enhances the performance of your wifi network. You can check these steps :
- There is an option for users to attach their PC via cable or Wi-Fi using its Galaway default SSID name.
- After this, you can open your favorite browsers, such as Google Chrome, Safari, Firefox, and others.
- Here you can enter the website at http:/192.168.10.1, or there is an option to enter the Galaway Wi-Fi extender website.
- Now you can enter admin, which is used as the default password, and now run the setup wizard.
- There is a need to scan the available WiFi network.
- Now you can choose your wifi network and again hit the wifi key.
- You can click on the next button and give a new name to your Galaway extender.
- After this, you can save it, and it is necessary to reboot your system.
Galaway WIFI Extender Setup by Pairing it with Mobile’s WiFi
There is also an option for users to use their mobile internet for the Galaway wifi extender setup. You can follow these steps :
- There is a need to open the wifi settings on your phone.
- You can now scan all the available networks.
- It is necessary to enter Galaway as a default name.
- Now you can open the browser on your phone and enter http:/192.168.10.1 or http://ap.setup page.
- Here, you tap OK and go to the Galaway login page.
- Now you can use "admin" as your password.
- You can also search for available networks by opening wifi wizards.
- It is time to choose your preferred wifi network and create an extender SSID.
- After this, you can tap on Finish.
- There is a need to check that your internet connection is set up properly.
This method is simple and quick for the Galaway WiFi extender setup.
Wrapping Up
You can use any method for the Galaway wifi extender setup. It also depends on the user's preferences for the method they want to adopt. There is a need to follow all steps accordingly so that you can quickly set up their Galaway extender. Here is also the services of Netgear wifi Extender Troubleshooting
For more information visit techplanet.today
No comments yet