iPhone Won’t Connect to Wavlink Repeater? Let’s Get It Fixed!

iPhone Won’t Connect to Wavlink Repeater? Let’s Get It Fixed!
5 min read

So, you’ve just installed a brand new Wavlink WiFi repeater in your house? Well, it is the ultimate solution to get rid of WiFi blind zones. But, what happened? Why are you worried? Is your iPhone not connecting to repeater even after completing Wavlink setup? Worry not! We’ve got you covered. All you have to do is stick to his reading and implement the troubleshooting techniques mentioned below.

But, before you get down to the troubleshooting tactics, have a look at the reasons jotted down. Knowing them will make you resolve the issue easier.

Reasons: iPhone Won’t Connect to Wavlink Repeater

  • Your iPhone might be struggling with technical glitches. Know that technical glitches are so potent that they can also make your device non-functional. Therefore, they hold the first position among the reasons dragging you to the issue you are facing.

  • Chances are that you are using the incorrect WiFi password to access the Wavlink repeater. A lot of stances have been recorded where iPhone won’t connect to Wavlink repeater due to a typo in the WiFi password.

  • Accessing the wrong WiFi network also prevents the iPhone from establishing a successful connection with the repeater. Perhaps, the WiFi names of your repeater and your neighbor’s device are the same.

  • Every Wavlink WiFi repeater runs on firmware which needs to be updated on a timely basis. It seems that you acted carelessly when your extender demanded the firmware update via the Wavlink WiFi repeater setup wizard. FYI, the firmware directly controls every activity of your Wavlink repeater. Thus, its outdated version becomes one of the most prominent reasons resulting in the connectivity issue between the iPhone and Wavlink WiFi repeater.

  • Poor network signal is another reason that can prevent you from connecting the iPhone to the Wavlink repeater. How can you expect your devices to connect if poor or no signal is there, can you?

  • Antivirus applications are known to kick away viruses from your iPhone. But, they can also be the reason preventing the connection between your devices.

So, these were the potential reasons that might have led you to the issue you are facing. It is time to move ahead and troubleshoot the issue based on the reason behind it.

Fixed: iPhone Won’t Connect to Wavlink Repeater

  • When we talk about technical glitches, the first thing that you should do is go for the reboot process. Therefore, without wasting your time, reboot your iPhone. Well, that’s not a lengthy process at all. But, it can consume a few minutes. You just have to press the Power button on your iPhone till a few options reveal on the screen. Thereafter, select reboot, and you’re done.

  • Check the WiFi password entered by you to access your Wavlink repeater. In case you find any typing mistakes, consider re-entering the password and check if you get success in creating a connection between your Wavlink repeater and iPhone this time.

  • Are you sure that you are accessing the correct WiFi network? If not, then you are required to check the SSID of your Wavlink extender. Just access wifi.wavlink.com and log in to your repeater. Thereafter, not down the SSID and access the correct network.

  • Update the firmware of your Wavlink wireless repeater by logging in to it. The process is as same as the firmware update process of the router via the Wavlink router login screen. However, you have to keep one point in mind i.e. you are not allowed to upload the firmware file of another extender model on your extender model. Such activity can brick your Wavlink repeater forever.

  • Poor network signals can be resolved by mending the connection status between your Wavlink repeater and the host router. It means you have to make the connection stable. Wireless connection users are advised to keep a clear line of sight between both devices whereas wired connection users need to make sure that the cable roped in for the connection is damage-free.

  • Temporarily disable antivirus applications or ad blockers on your iPhone. As mentioned earlier that they can also prevent you from connecting your iPhone to the repeater. Now, see if you get success in getting rid of the issue.

Verdict

That’s all about what can be done to fix the iPhone won’t connect to Wavlink repeater issue. Here’s to the hope that after following the aforementioned troubleshooting tactics, you won’t get troubled by the same issue any more. Thanks for reading the post.

In case you have found a mistake in the text, please send a message to the author by selecting the mistake and pressing Ctrl-Enter.
Wavlink WiFi extender setup 2
Are you looking for a complete guide to do Wavlink WiFi extender setup? If yes, then your search ends here. Get complete guidelines to perform Wavlink setup , w...
Comments (0)

    No comments yet

You must be logged in to comment.

Sign In